Technical Programme
Sept. 10th, 2023
Sept. 11th, 2023
08:30
09:15
09:45
11:30
1PoM - Poster sessions
Session chair: Maria BALDINI
Innovative Research and Design of the HTS Main Magnet for High Power Proton Cyclotron CYCIAE-100B
Tianjue ZHANG, China Institute of Atomic Energy, Beijing, CHINADesign of a 2G high-temperature-superconducting undulator structure and a winding method
Chin-Kang YANG, National Synchrotron Radiation Research Center, Hsinchu, TAIWANDevelopment of high-field Canted Cosine Theta dipole magnets based on high-temperature superconducting CORC Cables
Shaoqing WEI, Institute of Plasma Physics (IPP), Chinese Academy of Sciences (CAS), Hefei, CHINAA field quality modeling in canted cosine theta dipole magnets wound using REBCO cables.
Milan MAJOROS, The Ohio State University, Columbus, USALatest development of CORC® cables and wires and their implementation into prototype accelerator magnets
Danko VAN DER LAAN, Advanced Conductor Technologies LLC, Boulder, USADevelopment and test of a two-layer dipole coil made of Bi2212 Rutherford cable
Alexander ZLOBIN, Fermi National Accelerator Laboratory, Batavia, USAExperimental studies of current transfer in a REBCO tape-stack cable
Connor BOWERMAN, Texas A&M University, College Staion, USAInclined stack in the channel conductor (ISICC)
Daria KOLOMENTSEVA, SuperOx SJSC, Moscow, RUSSIAN FEDERATIONTest of High Temperature Superconducting REBCO Coil Assembly for a Multi-Frequency ECR Ion Source
Tsun Him CHONG, Osaka University, Osaka, JAPANDevelopment and tests of 2G HTS quadrupole magnet for Nuclotron upgrade
Mikhail NOVIKOV, Joint Institute for Nuclear Research, Dubna, RUSSIAN FEDERATIONDevelopment and testing of HTS coil with ceramic coated REBCO conductor for high radiation tolerance
Mukesh DHAKARWAL, High Energy Accelerator Research Organization, Tokai, Ibaraki, 319-1106, JAPANPerformance test of a special sextupole magnet using high-temperature superconductors
Xudong WANG, High Energy Accelerator Research Organization, Tsukuba, JAPANA Possible Alternative Concept of HTS Accelerator Magnets
Ian PONG, Lawrence Berkeley National Laboratory, Berkeley, USAResearch and development of radiation-resistant HTS magnet for application to high-intensity muon sources
Masami IIO, High Energy Accelerator Research Organization (KEK), J-PARC Center, Tokai, JAPANSession chairs: Emmanuele RAVAIOLI, Rob VAN WEELDEREN
From Nuclotron Synchrotron to NICA Collider – the Common Cryogenic Concept for the Various Superconducting Magnets, their Design Specifics and Test Results
Egbert FISCHER, Joint Institute for Nuclear Research, Dubna, RUSSIAN FEDERATIONAssessment of thermal properties of HeII-cooled Nb3Sn superconducting coil samples of the HL-LHC particle accelerator project
Rob VAN WEELDEREN, Cern, Meyrin, SWITZERLANDPressure drop measurement with different states of helium flowing in a copper profile cable-in-conduit conductor: experimental setup, results and analysis
Théophile PONTAROLLO, CEA Paris-Saclay, Gif-Sur-Yvette, FRANCEDesign of an apparatus to evaluate the turn-to-turn thermal conductivity of MI and NI HTS.
Emeric BENOIST, CEA Pairs-Saclay, Gif-Sur-Yvette, FRANCEAnalysis and design of a compact emittance measurement system based on quadrople scanning method
Xu LIU, Huazhong University of Science and Technology, Wuhan, CHINAThe optimal design and measurement of magnet system for the gas-filled recoil separator SHANS2
Qiang HU, Institute of Modern Physics, Chinese Academy of Sciences, LanZhou, CHINASession chairs: Jeroen VAN NUGTEREN, Pedro CARVAS
Advancing ST80-HTS coil design with RAT and Raccoon
Jeroen VAN NUGTEREN, Littlebeast Engineering, Genolier, SWITZERLANDR&D progress of coil-case for CRAFT TF prototype coil
Chao FANG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031, People’s Republic of China, Hefei, CHINAEnd of the winding of the European Poloidal Field coils for the ITER project
Pedro CARVAS, Fusion For Energy, Cadarache, FRANCENoise-robust magnet field power supply multi-granularity fault diagnosis based on wavelet Integrated one-dimension convolutional neural network
Zhong LINGPENG, Chongqing University of Posts and Telecommunications, Chongqing, CHINADevelopment progress of CRAFT TF coil
Yan ZHAOHUI, Institute of Plasma Physics， Hefei Institutes of Physical Science Chinese Academy of Sciences, Hefei, CHINAUpdate on the EU-DEMO magnets design activities at CEA
Alexandre TORRE, CEA, Saint-Paul-lez-Durance, FRANCEResearch and Implement of CRAFT TF Coil Turn Insulation Automatic Wrapping
He JIAN, Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, 230031, China, Hefei City, CHINADesign of control system for the magnet performance test device for CFETR TF coil
Shuqing ZHANG, Hefei Institutes of Physical Sciences, Chinese Academy of Sciences, hefei, CHINAOptimized HTS Coils for the EPOS Stellarator
Paul HUSLAGE, Max Planck Institute of Plasmaphysics, Garching, GERMANYITER Toroidal Field Coil Delivery and Preparatory Work at ITER Site
Kenji GOMIKAWA, ITER Organization, St Paul Lez Durance Cedex, FRANCEFabrication of the poloidal field coils for iter
Eugenio CAVANNA, ASG Superconductors S.p.A., Genova, ITALYSession chair: So NOGUCHI
A homogenized PEEC model for metal as insulation magnets
Nikola JERANCE, CEA saclay, Gif-sur-Yvette, FRANCEStudy on quench characteristics of high-temperature superconducting coils under multi-field coupling
Wenzhe HONG, Hefei Institute of Physical Sciences, Chinese Academy of Sciences, hefei, CHINAModelling and design implications of quenches in hybrid HTS/LTS high field magnets
Andrew VARNEY, Oxford Instruments NanoScience, Abingdon, UNITED KINGDOMA 2D mechanical analysis method of the no-insulation magnet considering the shielding current
Pu DUAN, Huazhong University of Science and Technology, Wuhan, CHINAStudy of electromagnetic phenomena and thermal stability of HTS no-insulation coils affected by sudden fluctuation of external magnetic field
Daisuke MIYAGI, Chiba University, Chiba, JAPANStudy on Current Behavior and Thermal Stability of No-Insulation Coils with Parallel HTS Tapes under External Magnetic Field Fluctuation
Hiroyasu KOBAYASHI, Chiba University, Chiba, JAPANThermo-hydraulic modelling of He-I behavior under very high magnetic fields found in HTS magnets
Hajar ZGOUR, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEHeat transfer degradation in liquid helium pool boiling due to magneto-gravitational forces : influence on very high field magnet cooling
Simon BAGNIS, CEA Saclay, Gif-sur-Yvette, FRANCEMagnetDB a platform for the simulation of High Field Magnet
Christophe TROPHIME, LNCMI - EMFL / CNRS / UGA, Grenoble, FRANCEStepwise flux amplification of model magnet stacked by HTS plates with single connection multi-holes
Yanchen SHI, North China Electric Power University, Beijing, CHINADesign of all-superconducting user magnets generating more than 40T for the SuperEMFL project
Matthias DUROCHAT, CEA Saclay, Gif-sur-Yvette, FRANCEConceptual Design of Hybrid HTS Magnet for High - Field Application
Xinxing QIAN, High Magnetic Field Laboratory, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, CHINASession chair: Anna KARIO
Experimental study on the critical current of REBCO solenoid insert coil under various curing process
Guanyu XIAO, Institute of Plasma Physics,Chinese Academy of Sciences, Hefei, CHINADesign of stacked high temperature superconducting cable-in-conduit conductor for high-field application
Shige YANG, High Magnetic Field Laboratory, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, CHINAT-A Combination Model for Solving Current Distributions in Large-Scale Cables with Stacked ReBCO Tapes
Lei WANG, Institute of plasma physics, Chinese Academy of Sciences, Hefei, CHINACORC® cables: numerical characterization of the critical current after bending process
Sofia VIARENGO, Politecnico di Torino, Torino, ITALYPreliminary design of a 12T nb3Sn and nbTi superconducting dipole with mini round cable
Zhengnan HAN, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINAPerformance degradation of multi-layer spiral cable during manufacturing procedure
Xuan ZHOU, Shanghai Jiao Tong University, Shanghai, CHINAStudy on Performance Degradation of Multi-layer Spiral Superconducting Cable Under Bending Load
Xuan ZHOU, Shanghai Jiao Tong University, Shanghai, CHINAPerformance evaluation of field-based spiral HTS cable with variable layers towards high-field magnet
Haosheng YE, Shanghai Jiao Tong university, Shanghai, CHINAPerformance evaluation of terminal resistance of a preliminary cable-in-conduit conductor made by multi-layer spiral HTS cable
Haosheng YE, Shanghai Jiao Tong university, Shanghai, CHINASession chairs: Seungyong HAHN, Olivier DUBOIS
Artificial intelligence for MRI magnet design, manufacturing and testing
Michael PARIZH, General Electric, Niskayuna, USAIseult Whole Body 11.7 T MRI : Gradients interaction tests with cryogenics and the Magnet Safety System (MSS).
Olivier DUBOIS, CEA, Gif-sur-Yvette, FRANCEDesign and performance analysis of gradient coil for high-field HTS rebco mri magnet
Hyunsoo PARK, Seoul National University, Seoul, KOREA, REPUBLIC OFCurrent development progress of 6 T all-HTS metal-insulation MRI magnet
Kibum CHOI, Seoul National University, Seoul, KOREA, REPUBLIC OFMechanical design and analysis of a 14 T whole-body size MRI magnet
Houxiang HAN, Institute of Plasma and Physics, CAS, Hefei, CHINAA Compact HTS MRI Instrument
Adil SHAH, University of Cambridge, Cambridge, UNITED KINGDOMDesign, fabrication and measurement of a 3T cryogen-free animal MRI system
Yaohui WANG, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAMechanical Analysis of a Head-Only 1.5T Magnetic Resonance Imaging Superconducting Magnet
Yunxing SONG, Huazhong University of Science and Technology, Wuhan, CHINADevelopment of a 7 T 21cm Aperture Magnetic Resonance Imaging (MRI) System
Zhan ZHANG, Institute of Energy(IE) Hefei Comprehensive National Science Center(HCNSC), Hefei, CHINASession chair: Yue WU
Evaluation of AC loss characteristics of multifilamentary REBCO tapes by mechanical scratching of MgO2 areas
Oishi RYOMA, Kyushu University, Fukuoka city, JAPANAC loss analysis of HTS cables according to core shape
Miyeon YOON, Tech University of Korea, Siheung-si, KOREA, REPUBLIC OFSimulation of dynamic resistance and total loss HTS CORC cables at various temperatures
Zhenan JIANG, Paihau-Robinson Research Institute, Victoria University of Wellington, LOWER HUTT, NEW ZEALAND3D Modelling of bended corc® cables: electromagnetic assessment
Matthew CLEGG, University of Leicester, Leicester, UNITED KINGDOMA short-circuit-current experiment of high-temperature superconductor tapes
Sataro YAMAGUCHI, Chubu University, Kasugai, JAPANNumerical study on the transport AC loss of bent CORC cables
Xuan DING, Huazhong University of Science and Technology, Wuhan, CHINAMeasurement and Analysis of AC losses of Twisted Quasi-isotropic Strand for Fabrication of Rutherford cable
Ye HE, North China Electric Power University, Beijing, CHINAExperimental Study of Magnetization Loss by External Magnetic Field in CORC-TSTC Hybrid Composite Conductor
Myeonghee LEE, Tech University of Korea, Siheung-si, KOREA, REPUBLIC OFAnalyses on current sharing of CICC consisting of transposed Q-IS
Chengyang HU, North China Electric Power University, Beijing, CHINA3D Modelling and calculation of ac losses in high-temperature superconducting magnet subject to travelling magnetic fields
Tianyong GONG, Southwest Jiaotong University, Chengdu, CHINAAlternating Current (AC) Loss Measurements in High Temperature Superconducting (HTS) Magnets
Joseph NALBACH, Naval Surface Warfare Center Philadelphia Division, Philadelphia, USAInstantaneous AC Loss and Inductance Measurement of HTS Coil with FDW-LS
Feiyang LONG, Huazhong University of Science and Technology, wuhan, CHINAAC loss study in hts wire and coil assemblies carrying ac current with dc offset
Yue WU, School of Electrical Engineering, Beijing Jiaotong University; Paihau-Robinson Research Institute, Victoria University of Wellington, Wellington, NEW ZEALANDAnalysis of Charging Strategy for Large Conduction-Cooled HTS Magnet Operating with AC
Yaohui WANG, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINASession chairs: Akihiro KIKUCHI, Ulf TROCIEWITZ
Recent development of practical high temperature superconductors with powder in tube process in NIN
Shengnan ZHANG, Northwest Institute for Nonferrous Metal Research, Xi'an, CHINAComparison study of bending properties of Bi-2212 strands were performed with different heat treatment
Mengliang ZHOU, Institute of Plasma Physics,Chinese Academy of Sciences, Hefei, CHINAPerformance and microscopic analysis of Bi-2212 superconducting wire based on low heating rate heat treatment process
Dongsheng YANG, Institute of Plasma Physics, Chinese Academy of Sciences, HeFei, CHINAMgB2 superconducting wire of Sam Dong
Jun Hyuk CHOI, Sam Dong Co.,Ltd., Daejeon, KOREA, REPUBLIC OFThe Preparation Of MgB2 Conductors For Magnet Application Of SMES In WST
Mingjiang WANG, Western Superconducting Technologies Co., Ltd., Xi'an, CHINADecomposed Mg(BH4)2 as precursor to prepare MgB2 superconducting tapes with hot-pressing sintering
Dan XI, Application Superconductivity Research Center, State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, School of Physics, Peking University, Beijing, CHINAMagnetization Anisotropy of MgB2 Filaments in Ferromagnetic Matrix
Igor RUDNEV, National Research Nuclear University MEPhI, Moscow, RUSSIAN FEDERATIONDevelopment for MgB2 and YBa2Cu3O7-δ hybrid superconducting wire
Hidetoshi OGURO, Tokai University, Hiratsuka, Kanagawa, JAPANSession chair: Alfredo PORTONE
Quench detection of high temperature superconductivity based on digital twin method
Kexing LI, Shanghai Jiao Tong University, Shanghai, CHINAExperimental studies on quench behavior measurements of HTS tapes with various heater configurations
Hui YU, High Magnetic Field Laboratory, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, CHINAQuench Prediction for REBCO Pancake Coils Using LSTM
Yusuke NAKAI, Hokkaido University, Sapporo, JAPANProtection method for No-Insulation REBCO coils with local noncontact area between turns
Nodoka TERAUCHI, Waseda University, Tokyo, JAPANInvestigation on the quench characteristics of parallel high temperature superconducting tapes
Xianhao LI, Huazhong University of Science and Technology, Wuhan, CHINAThe quench behavior of an intra-Layer No-Insulation (LNI) REBCO coil
Ayano YASUI, Sophia University, Tokyo, JAPANA comparison of quench behaviors of REBCO and Bi2223 staked-tape cables
Lijun CAI, Southwestern Institute of Physics, Chengdu, CHINAStudy on reduction of quench recovery time by inductive energy extraction
Yuta EBARA, Sumitomo Heavy Industries, Ltd., Yokosuka, JAPAN13:00
Session chairs: Herman TEN KATE, Bruce STRAUSS
Magnets for a Muon Collider – Needs and Plans
Alexey DUDAREV, CERN, Geneva 23, SWITZERLANDProgress of the High Field Magnet Program for Next-generation High-energy Accelerators
Qingjin XU, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINAEnabling the next generation of facilities for particle physics
Stephen GOURLAY, Fermi National Accelerator Laboratory, Batavia, USAWinding and test results of a hard-way bend free ReBCO cloverleaf type of accelerator coil demonstrator
Thomas NES, University of Twente, Enschede, THE NETHERLANDSCurved-Canted-Cosine-Theta (CCCT) Dipole Prototype Development at CERN
Ariel HAZIOT, CERN, Geneva, SWITZERLANDDesign, Procurement, and Manufacturing of R2D2, the Research Racetrack Dipole Demonstrator
Etienne ROCHEPAULT, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEPENeLOPE - magneto-gravitational storage of neutrons
Ruediger PICKER, TRIUMF, Vancouver, CANADAFabrication, testing, and installation of the first Nb3Sn-based undulator at the Advanced Photon Source
Ibrahim KESGIN, Argonne National Laboratory, Lemont, USASession chairs: Ziad MELHEM, Marco BRESCHI
Fabrication and test of a 400 kW-class fully superconducting synchronous motor using REBCO tape for an electric propulsion system
Hiroshi MIYAZAKI, Kyushu University, Fukuoka, JAPANAC losses for HTS coils used in aviation propulsion motors
Min ZHANG, University of Strathclyde, GLASGOW, UNITED KINGDOMUpscaled cryogenic design of a 20 MW class high efficiency ultra-light superconducting generator (SCG) for offshore wind
Wolfgang STAUTNER, GE Research, Niskayuna, USACable geometry dependence of ac losses in Spiral Copper-plated Striated Coated-conductor cables carrying ac currents under ac magnetic fields
Yusuke SOGABE, Kyoto University, Kyoto, JAPANDesigning an electromagnetic shield to protect rotor components in superconducting synchronous machines
James STOREY, Victoria University of Wellington, Lower Hutt, NEW ZEALANDSMES coil design for powering high field pulsed magnets
Ashish BHARDWAJ, Los Alamos National Laboratory, Los Alamos, FAMU-FSU College of Engineering, The Center for Advanced Power Systems, Tallahassee, USASuccessful operation of the first magnetic density separation NbTi magnet system
Sander WESSEL, University of Twente, Enschede, THE NETHERLANDSSession chairs: Min LIAO, Monica MARTINEZ LOPEZ
Development progresses of CRAFT SC Material testing facility
Fang LIU, Institute of Plasma Physics Chinese Academy of Sciences, Hefei, CHINAConceptual design of the EDIPO2 magnet
Xabier SARASOLA, EPFL-SPC, Villigen PSI, SWITZERLANDProgress on the Development of the Coils for the 15 T Cable Test Facility Dipole Magnet
Jose Luis RUDEIROS FERNANDEZ, Lawrence Berkeley National Laboratory, Berkeley, USAThe design, manufacture and test of first HTS insert coil with ReBCO cable exceeding 21T for Fusion applications
Chao ZHOU, Institute of Plasma Physics, Chinese Academy of Sciences, , CHINAA new facility for high-fidelity cryogenic neutron irradiation of superconducting fusion magnet materials
Zachary HARTWIG, Massachusetts Institute of Technology, Cambridge, USAITER CS Module test facility operational lessons from CS Modules 1-4
Kenneth KHUMTHONG, General Atomics, San Diego, USALatest Progress on DC Magnet for Super-X Test Facility in CRAFT
Houxiang HAN, Institute of Plasma and Physics, CAS, Hefei, CHINA16:30
Roxie23: Status and future plans for the ROXIE software
Stephan RUSSENSCHUCK, CERN, Meyrin, SWITZERLANDRoxie23: Interfacing with ROXIE: Scripting, Python, and Model Based Design
Stephan RUSSENSCHUCK, CERN, Meyrin, SWITZERLANDRoxie23: External generation of coil geometries based on differential geometry
Stephan RUSSENSCHUCK, CERN, Meyrin, SWITZERLANDUser Stories: Computational needs at INFN
Stephan RUSSENSCHUCK, CERN, Meyrin, SWITZERLANDUser Stories: Computational needs at GSI
Stephan RUSSENSCHUCK, CERN, Meyrin, SWITZERLANDUser Stories: Computational needs at Brookhaven
Stephan RUSSENSCHUCK, CERN, Meyrin, SWITZERLAND16:30
1PoA - Poster sessions
Session chair: Hélène FELICE
Development and Mechanical Analysis of the First Paraffin-wax and Stycast 2850FT based Canted-Cosine-Theta Subscale Magnets
Jose Luis RUDEIROS FERNANDEZ, Lawrence Berkeley National Laboratory, Berkeley, USAMechanical design of the interaction region dipole b1pf for eic
Christopher RUNYAN, Brookhaven National Laboratory, Upton, USADesign of B1PF- A Large Aperture Dipole Magnet for EIC
Febin KURIAN, Brookhaven National Laboratory, Upton, USADesign and optimization of a fast switching magnet for beam delivery in CSNS-II
Wenjie HAN, Institute of High Energy Physics, Chinese Academy of Sciences, Dongguan, CHINAMechanical design of the superconducting magnet for the 28 ghz ecr ion source asterics
Tanguy CADOUX, CEA Saclay, Gif-sur-Yvette, FRANCEA study on the improvement of the superconducting magnet system for the 28 GHz ECRIS at KBSI
Jonggi HONG, Korea Basic Science Institute, Busan, KOREA, REPUBLIC OFMagnetic field measurements of an iron-laminated quadrupole to be used in the alternatig gradient synchrotron
Nicholaos TSOUPAS, Brookhaven National Laboratory, Upton, USAMesoscale numerical modelling of superconducting Rutherford cables and magnet coils
Alessandro BERTARELLI, CERN, Geneva 23, SWITZERLANDStudy on mechanical stability of the septum magnet under unsteady condition
Jingjing ZHANG, School of Nuclear Science and Technology，Lanzhou University, Lanzhou, CHINAMagnetic design and performance test of SHINE superconducting quadrupole magnets
Yawei HUANG, ShanghaiTech University, Shanghai, CHINASession chairs: Laura GARCIA FAJARDO, Andrea BERSANI
Effect of increased transverse coil preload on the performance of the RMM demonstrator magnet
Emma GAUTHERON, CERN, Meyrin, SWITZERLANDFabrication of a 1 m long Bi-2212 CCT dipole magnet and preliminary numerical analysis of a 1.5 m long Nb3Sn/Bi-2212 CCT hybrid magnet
Laura GARCIA FAJARDO, Lawrence Berkeley National Laboratory, Berkeley, USAMechanical design, assembly and strain measurement results of a 13-T superconducting dipole magnet
Yingzhe WANG, Institute of High Energy Physics, Beijing, CHINAThe distributed strain measurements of an HTS block-coil based on OFDR distributed fibre optical sensors
Canjie XIN, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINADevelopment of the mechanical mockup of the FalconD dipole
Michela BRACCO, INFN and University of Genoa, Genoa, ITALYDevelopment and qualification of high current splices and electrical connections for the HL-LHC magnets.
Rosario PRINCIPE, CERN, Geneva, SWITZERLANDA combined testing and modelling methodology for enhanced stress management of high-field superconducting magnets
óscar SACRISTÁN DE FRUTOS, CERN, Geneva, SWITZERLANDFirst cold mass assembly of full-scale prototype of beam separation dipole for the high-luminosity LHC upgrade
Michinaka SUGANO, High Energy Accelerator Research Organization (KEK), Tsukuba, JAPANMBRD prototype cold tests: mechanical stability and performances
Andrea BERSANI, INFN, Genova, ITALYInvestigation of the electromechanical properties of YBCO tapes irradiated by heavy ions and related fractographic analysis
Yuanzhou PAN, Lanzhou University, Lanzhou, CHINAMechanical behavior of the FAIR Super-FRS dipole during the cold tests
Victor KLEYMENOV, CEA Saclay, Gif-sur-Yvette, FRANCECryogenic tests of SHINE superconducting quadrupole magnets in the Multifunction Test Facility
Yanfei ZHAI, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, CHINASession chairs: Daniele PLACIDO, Pierre BAUER
Ac loss calculation for the iter correction coils during plasma operation
Pierre BAUER, ITER Organization, Saint-Paul-lez-Durance, FRANCEPredictive analysis of thermal-hydraulic behaviour for quench experiment of the CFETR CSMC
Aiguo SANG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAAnalysis of AC losses for CFETR TF coil
Liu XUFENG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAThermo-hydraulic calculations on W7-X coils for updated quench detection system parameters
Konrad RISSE, Max-Planck-Institute for Plasma Physics (IPP), Greifswald, GERMANYThermal hydraulic analysis of CFETR TF coil
Xinghao WEN, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAModeling thermal-hydraulic and electro-magnetothermal dynamics for non-planar coils based on VIPER-like cables with OpenSc2
Daniele PLACIDO, Politecnico di Torino, Turin, ITALYPreliminary Design And Stability Analysis of YBCO CICC Conductor
Liu HAIHONG, Institute of plasma physics, Chinese Academy of Sciences, HeFei, CHINAEffect of cool-down speed on temperature distribution in the JT-60SA Superconducting coil
Shogo SONODA, Sophia University, Tokyo, JAPANDesign, Fabrication, and Testing of a Liquid Helium Cryostat for an Ultra-Compact No-Insulation REBCO Magnet
Yi LI, Princeton Plasma Physics Laboratory, Princeton, New Jersey, USAExtended Analysis of TF02 Feeder Performances and Risks During Operation in JT-60SA Tokamak
Louis ZANI, Fusion for Energy, Garching bei Munchen, GERMANYSession chairs: Ricarda SCHEICH, Fabrice SIMON
Conceptual design of 15 T/220 mm warm-bore magnet for the 350 GHz, 1 MW class gyrotrons for fusion reactors
Dongkeun PARK, Massachusetts Institute of Technology, Cambridge, USATransient overvoltage to ground of superconducting magnet due to stray capacitance of power supply in JT-60SA tokamak
Shoichi HATAKEYAMA, National Institutes for Quantum Science and Technology, Naka, JAPANStartup of a Multi-physics Simulation Platform for Fusion Magnet Design and Analyses
Yaohui WANG, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAReduction of Reactive Power Compensation Efforts for Fusion Magnet Power Supplies Using Variable Series Capacitors
Shinichi NOMURA, Meiji University, Kawasaki, JAPANDesign and qualification of iter in vessel coil system instrumentation
Ricarda SCHEICH, University Duisburg-Essen, Bochum, GERMANYDemo cs exploration studies regarding thermal-hydraulic-parameters and superconducting amount of material
Nathan RICHERMOZ, Univ. Grenoble Alpes, CEA, IRIG, DSBT, Grenoble, FRANCEDevelopment and Qualification of the Internal Joint for CFETR TF Prototype Coil
Yu WU, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031, People’s Republic of China, Hefei, CHINASelected topics of technical challenges of the Central Solenoid
Yasuyuki MIYOSHI, ITER Organization, Saint-Paul-lez-Durance, FRANCEDesign Finalization and Procurement Phase of the DTT Poloidal Field Magnet System
Simonetta TURTU', ENEA, Frascati, ITALYPerfect magnetic field confinement with bulk superconductors for fusion magnets
Jaume CUNILL-SUBIRANAS, Universitat Autonoma Barcelona, Bellaterra, SPAINManufacturing and assembly of the ITER correction coils.
Fabrice SIMON, ITER ORGANIZATION, Saint-Paul-lez-Durance, FRANCESession chairs: Mitsuhiro FUKUDA, Vera KORCHEVNYUK
Fixed-Field HTS Coil Technology and Production for Proton Therapy
Philip MALLON, Lawrence Berkeley National Laboratory, Berkeley, USADesign of an AG-CCT magnet using a magnetic shield for large momentum gantry in proton therapy
Yicheng LIAO, Huazhong University of Science and Technology, Wuhan, CHINAA Numerical Calculation Method for Magnetic Field and Harmonics of Curved-CCT Magnet
Xingmeng HUANG, University of Science and Technology of China, Hefei, CHINADesign of a compact beam scanning system for a proton therapy superconducting gantry
Xu LIU, Huazhong University of Science and Technology, Wuhan, CHINAThe development of SK30 Cyclotron magnet
Qinggao YAO, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINAHigh temperature superconducting magnet for the skeleton cyclotron
Mitsuhiro FUKUDA, RCNP, Osaka University, Ibaraki, JAPANOptimization of HTS magnet ramping profile for medical synchrotron considering beam loss and magnet stability
Woojin SONG, Pohang University of Science and Tehcnology, Pohang, KOREA, REPUBLIC OFThe Design of Superconducting Combined Multipole Magnets in Miniaturized Heavy Ion Therapy Facility
Lizhen MA, Institute of Modern Physics，Chinese Academy of Sciences, Lanzhou, CHINAOpportunities and challenges of magnet design for beam delivery in compact proton therapy systems
Bin QIN, Huazhong University of Science and Technology, Wuhan, CHINAInnovative Beam Separator for FLASH Electron Therapy Facilities
Vera KORCHEVNYUK, CERN, Meyrin, SWITZERLANDDynamic magnetic field and lamination simulation of scanning magnet for proton therapy system
Xinyi SHEN, Huazhong University of Science and Technology, Wuhan, CHINADesign a combined function curved DCT superconducting magnet for the compact heavy ion therapy
Yi ZHU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINADesign and Fabrication of a 2.5T Combined Function Canted-Cosine-Theta Magnet
Sun JINSHUI, Institute of Electrical Engineering of the Chinese Academy of Sciences, Beijing, CHINASession chair: Futamura MUNEO
Electromagnetic design of a REBCO four-pole full-pitched armature coil composed of trapezoidal windings for fully superconducting synchronous motors
Yuki EMORI, Kyushu University, Fukuoka, JAPANStudies on feasibility of wind-power generator using high temperature superconducting induction generator and its dynamic characteristics
Yusuke TAKAHASHI, Sophia University, Chiyoda-ku, JAPANResearch on integrated system of non-grid-connected superconducting wind power hydrogen production
Liufei SHEN, College of Electrical and Information Engineering, Hunan University, Changsha, CHINADynamic characteristics of a fully HTS magnetic bearing under harmonic excitation
Changqing YE, Hohai University, Changzhou, CHINAMagnetic field of improved rails in superconducting transport system
Futamura MUNEO, Akita Prefectural University, Yurihonjo, JAPANResearch of an Axial Magnetic Suspension High Temperature Superconducting Homopolar Inductor Machine for Flywheel Energy Storage System
Yuanhang PAN, Hunan University, Changsha, CHINADevelopment of a Linear Generator Using Coils with Multilayer Iron Cores for an Undulator-Type Tidal Current Generator
Yuhi YAMANOUCHI, Tokyo University of Marine Science and Technology, Tokyo, JAPANStudy of Axial-type Synchronous Motors with Bulk GdBCO Magnets
Zhengwei ZHAO, Guangdong Ocean University, Zhanjiang, CHINAFirst validation of a large bore cryogen-free pancake prototype
Julien VIALLE, CNRS Institut Néel, Grenoble, FRANCECurrent Distributions in Armature Coils Comprising Two Sizes of Racetrack Double-Pancakes with REBCO Striated Tapes
Atsushi TAKASHIMA, Kyushu University, Fukuoka, JAPANStudy of an axial-flux magnetic coupler with clutches for superconducting flywheel energy storage system
Guomin ZHANG, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAApplication of multi-coil structure magnet for improving welding ability in magnetic pulse welding
Xiaoxiang LI, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINADevelopment of a 10 T Split-pair Magnet with Recondensing Cryostat and 4 K Variable Temperature Insert for Optics Application
Wenbin MA, High Magnetic Field Laboratory, Heifei Institute of Physical Science, Chinese Academy of Science, HEFEI, CHINASession chair: Shun MIURA
Experimental Analysis of the Parameters Affecting a High-Temperature Superconductor Current Lead
Seoung Eon KIM, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFDesign and Current Characteristics Study of Flat Cable with Stacked 2G HTS Tapes for Superconducting Magnetic Energy Storage
Songzhen YUAN, Beijing Jiaotong University, Beijing, CHINA3D Modelling of VIPER TSTC Cables Under Transverse Magnetic Field
Matthew CLEGG, University of Leicester, Leicester, UNITED KINGDOMPerformance evaluation of a simple stacked high-current HTS conductor with metal-gap
Chen YU, Southwestern Institute of Physics, Chengdu, CHINAMagnetic Relaxation of Screening Current Induced Field in CICC made from Quasi-isotropic Strands
Yukang SHEN, North China Electric Power University, Beijing, CHINACurrent distribution among three-parallel REBCO wires in three-phase armature coils
Shun MIURA, Kyushu University, Fukuoka, JAPANCurrent sharing temperature and quench characteristics of REBCO quasi-isotropic superconducting strands in different Sheaths
Wei PI, North China Electric Power University, Beijing, CHINAAnalysis of the magnetization losses of twisted stacked-tape cables with striated strands
Myeonghee LEE, Tech University of Korea, Siheung-si, KOREA, REPUBLIC OFUltrafine Superconducting Composite Wires and Round Cables
Akihiro KIKUCHI, National Institute for Materials Science, Tsukuba, JAPANBending Strain of MgB2 Rutherford Cable Strands for Force-Balanced Helical Coil
Hang XU, Meiji University, Kawasaki-shi, JAPANComputationally aided reduction of energy losses in multicore MgB2 wires for high power density applications
Harold S. RUIZ, University of Leicester, Leicester, UNITED KINGDOMSession chairs: Yasuaki TAKEDA, Hyungjun KIM
A heater-triggered persistent current switch with high resistance state and improved structure
Haowen TAN, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China, Shanghai, CHINADesign, Manufacturing, and Testing of a Novel REBCO Persistent Current Switch
Yong CHEN, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINADevelopment of Low-resistivity Lap Joint for YBCO Tapes by Ultrasonic-assisted Soldering Method
Haihong WEI, Southwestern Institute of Physics, Chengdu, CHINAHigh-Temperature Superconducting Joint Technique using an Oxygen Path
Hyun Sung NOH, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFDependence of Electro-Mechanical Properties of REBCO Lap Joint on Fabrication Parameters
Younghoon KIM, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFFabrication of robust flux-free REBCO CC joints by hybridizing ultrasonic welding and soldering
Michael DE LEON, Andong National University, Andong, KOREA, REPUBLIC OFRobust joining solution between REBCO-to-copper for current lead using ultrasonic welding
Michael DE LEON, Andong National University, Andong, KOREA, REPUBLIC OF18:00
Session chairs: Seungyong HAHN, Thibault LÉCREVISSE
Conceptual design and preliminary tests for 33 T cryogen-free magnet REBCO insert
Arnaud BADEL, CNRS, Grenoble, FRANCEQuench protection of stacks of no-insulation HTS pancake coils by capacitor discharge
Tim MULDER, CERN, Meyrin, SWITZERLANDQuench analysis of a no-insulation REBCO magnet based on the ADI method considering the coupling effect of the cryostat
Hengkang ZHENG, Huazhong University of Science and Technology, Wuhan, CHINAConceptual Design of a 30-T High-Temperature Superconducting Magnet for Scanning Tunneling Microscope
Yuhu ZHAI, Princeton Plasma Physics Laboratory, Princeton, New Jersey, USAA novel and coupled Electro-Magnetic and Electro-Thermal model for metal-insulated high field magnets
Anang DADHICH, Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava, SLOVAKIAMechanical modeling of non-insulated REBCO high-field magnets with screening currents and thermal stress
Arpit Kumar SRIVASTAVA, Institute of Electrical engineering, Slovak Academy of Sciences, Bratislava, SLOVAKIAControl of turn-to-turn contact resistivity for resistive insulated REBCO coils
Jun LU, NHMFL, Tallahassee, USAAn electrometric method for the interface stress and contact resistance of pancake coil under winding force
Wurui TA, Lanzhou University, Lanzhou, CHINASession chairs: Pierre BAUER, Vladimir TRONZA
Post-mortem investigation of ITER toroidal field magnet conductors at varying loading conditions
Matthew JEWELL, University of Wisconsin - Eau Claire, Eau Claire, WI, USACharacteristics of new Nb3Sn strand developed in Korea for high field applications
Soun Pil KWON, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFStrain investigations of RRP® Nb3Sn wires for the test facility dipole project TFD
Najib CHEGGOUR, ASC-NHMFL-FSU, Tallahassee, USAThe effect of axial and transverse loading on the transport properties of high Jc Nb3Sn strand
Yun Hao LIU, Institute of Plasma Physics, Chinese Academy of Sciences, HEFEI, CHINAPerformance comparison of cables with transposition errors
Pierluigi BRUZZONE, EPFL-SPC, Villigen PSI, SWITZERLANDDetermination of Grain Size in Nb3Sn Utilizing Synthetic Grain Structures
Ian PONG, Lawrence Berkeley National Laboratory, Berkeley, USAFrom hot to cold: advanced materials for Nb3Sn based magnets
André BREM, Paul Scherrer Institute, Villigen, SWITZERLANDSession chairs: Tabea ARNDT, Cesar LUONGO
Magnetic field measurements of solenoid coils wound with copper-plated multifilament coated conductors
Yusuke SOGABE, Kyoto University, Kyoto, JAPANPerformance evaluation of a double pancake modular coil wound by multi-layer spiral HTS cable
Haosheng YE, Shanghai Jiao Tong university, Shanghai, CHINAPrinciple, modelling and experiments of a new axil-type superconducting magnetic bearing without using bulk superconductor
Tianhui YANG, Tinjin university, Tianjin, CHINAA Compact High-Temperature Superconducting Flux Pump for Persistent Current Mode Operation of HTS Magnets at 20K.
Hengpei LIAO, University of Strathclyde, Glasgow, UNITED KINGDOMNo-insulation BSCCO magnet impregnated with low-melting point metal
Shinnosuke MATSUNAGA, National Institute for Materials Science (to be belong), Tsukuba, JAPANTesting of conduction-cooled Bi-2223 magnet with shield coils at both ends
Gen NISHIJIMA, National Institute for Materials Science, Tsukuba, JAPANA novel high-field, compact HTS magnet: Finite-element modelling and initial experimental results
Ross TAYLOR, Paihau-Robinson Research Institute, Victoria University of Wellington, Lower Hutt, NEW ZEALANDUsing HTS coated conductor to generate high-field permanent magnets for transportation applications
Min ZHANG, University of Strathclyde, GLASGOW, UNITED KINGDOM20:00
Let’s get social!
Let us invite you to a beer tasting at the local Brasserie “Aquae Maltae”.
Address:
Brasserie de Provence
Rue de l'Ancienne Minoterie
Start: 18.00
Sept. 12th, 2023
08:15
09:35
Session chairs: Ziad MELHEM, Kathleen AMM
The Prospect of Carbon-Neutrality-Driven Energy & Power and the Possible Application of Superconductor
Liye XIAO, Institue of Electrical Engineering, Chinese Acadeny of Sciences, Beijing, CHINASuperconducting dc power transmission and energy storage for carbon neutrality in our globe
Sataro YAMAGUCHI, Chubu University, Kasugai, JAPANProgress and challenges of superconducting technology in Korea
Byung Su LIM, Korea Institute of Energy Technology, Naju, KOREA, REPUBLIC OF11:15
Session chairs: Valentina CORATO, Min LIAO
Fusion and magnets in fusion
Kinga GÁL, EUROfusion Consortium, Garching (Munich), GERMANYDevelopment of HTS conductors for EU-DEMO central solenoid
Valentina CORATO, ENEA, Frascati, ITALYITER magnet assembly experience and lessons learned for commissioning
Min LIAO, ITER Organization, Saint-Paul-lez-Durance, FRANCEThe recent progress of the CFERT central solenoid model coil(CSMC) program
Yanlan HU, Institue of Plasma physics,Chinese Academy of Sciences, HeFei, CHINAConstruction of superconducting conductor experiment facility for fusion reactor magnet
Hyunjung LEE, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFStatus of the project: new upper divertor with coils in asdex upgrade
Irene ZAMMUTO, Max Planck Institut for Plasmaphysik, Garching bei Muenchen, GERMANY11:30
2PoM - Poster sessions
Session chairs: Fernando TORAL FERNÁNDEZ, Anis BEN YAHIA
Subscale Stress-Managed Common Coil Design
Douglas M ARAUJO, PSI, Villigen, SWITZERLANDQuantitative and qualitative fingerprinting of defects with respect to training behavior in BOX samples to predict and improve performance of Nb3Sn accelerator magnets.
Michael DALY, Paul Scherrer Institute, Villigen, SWITZERLANDTesting of a specimen of Nb3Sn Cable-in-Conduit for high-field dipoles
Connor BOWERMAN, Texas A&M University, College Staion, USAThermomechanical characterization of Nb3Sn cables foreseen for the Graded Nb3Sn Research Racetrack Dipole Demonstrator (R2D2).
Elena FERNANDEZ MORA, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEAssessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb3Sn Coil under High Magnetic Field
Douglas M ARAUJO, PSI, Villigen, SWITZERLANDTransverse pressure performance of paraffin-impregnated Nb3Sn Rutherford cables compared to epoxy-impregnated cables
Simon OTTEN, University of Twente, Enschede, THE NETHERLANDSInfluence of fillers and debonding layers on training of short Nb3Sn Rutherford cables studied in the BOX facility
Herman TEN KATE, University of Twente, , THE NETHERLANDSSession chair: Arnaud BADEL
2D axisymmetric modeling of the hts insert nougat in a background magnetic field generated by resistive magnet.
Jeremie MUZET, LNCMI - EMFL / CNRS / UGA, Grenoble, FRANCEComparisons between results of quench simulations and tests of a 13 T REBCO coil in a strong background field and self-field
Iain DIXON, National High Magnetic Field Laboratory, Tallahassee, USAAnalysis of screening-current-induced strains in high field REBCO insert coils
Timing QU, Tsinghua University, Beijing, CHINANumerical and Experimental Analysis on the Critical Current Measurement and the Correction of No-Insulation HTS coil
Jiho LEE, Pusan National University, Busan, KOREA, REPUBLIC OFElectromagnetic-mechanical simulation of ultra-high field test coils and estimation of critical currents
Jaemin KIM, Seoul National University, Seoul, KOREA, REPUBLIC OFStress simulation of insert NI REBCO pancake coils wound with multi-bundled conductors considering individual turn movement
So NOGUCHI, Hokkaido University, Sapporo, JAPANA Gourd-shape Architecture of HTS Permanent coil with Functions of Flux Density Amplification and Flux Accumulation
Ziqing MENG, North China Electric Power University, Beijing, CHINAHTS Coil Module Structural Support for High Field Scanning Tunneling Microscope
Yuhu ZHAI, Princeton Plasma Physics Laboratory, Princeton, New Jersey, USAScreening current induced stress/strain analysis of high field REBCO coils including winding and cooldown
Yu SUETOMI, National High Magnetic Field Laboratory, Tallahassee, USASession chair: Jaemin KIM
Experimental and Numerical Investigations on the Screening Current-Induced Voltage and Repetitive Critical Current Measurement of the REBCO Coils
Jiho LEE, Pusan National University, Busan, KOREA, REPUBLIC OFEvaluation and analysis of a 10T-class small coil using REBCO coated conductors laminated with thick copper tapes
Shogo MUTO, Fujikura Ltd., Sakura, Chiba, JAPANDevelopment of rotating coil measurement system for superconducting multiplets in HIAF-HFRS
Li'An JIN, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINACrossover connections for REBCO double-pancake coil modules: Requirements, design and tests
William MARSHALL, National High Magnetic Field Laboratory, Tallahassee, USADesign and construction of a layer-wound insert coil with HTS tapes operating in a background magnetic field exceeding 14 T
J H. WAN, Institute Of Plasma Physics Chinese Academy Of Sciences, HeFei, CHINAExperimental study of multi-field measurements based on split superconducting magnet structure
Yongjie ZHANG, Lanzhou University of Technology, Lanzhou, CHINAMagnetic Field Control Of A No-Insulation Type REBCO Magnet Using Feedback Control Based On An Off-Centered Field Reference
Kwangmin KIM, National High Magnetic Field Laboratory, Tallahassee, USAFatigue Characteristics Of The HTS Coil
Kwangmin KIM, National High Magnetic Field Laboratory, Tallahassee, USAResolving Discrepancy Between MTI Coil and Short Sample for the 40T Project at the NHMFL
Ernesto BOSQUE, National High Magnetic Field Laboratory, Tallahassee, USAThe fabrication and test of iron-based superconducting high field inserted coils
Wenge CHEN, High Magnetic Field Laboratory, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, CHINASession chairs: Steven BALL, Dongkeun PARK
Shaping magnetic fields with bulk superconductors and applications to magnet technology
Natanael BORT-SOLDEVILA, Universitat Autonoma Barcelona, Bellaterra, SPAINDesign and comparison of external permanent magnet topologies for digestive tract examination
Yaohui WANG, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINADesign, Analysis and Control of Mobile Electromagnetic Actuation Systems for Neurovascular Interventions
Hongbo SUN, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAA cryogen-free, dual independent solenoid magnet system for nuclear demagnetisation experiments.
Steven BALL, Oxford Instruments NanoScience, Abingdon, UNITED KINGDOMDevelopment of a new iron core of Fe-based nanocrystalline strip for scanning magnet
Ming Bang LYU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINAAn Optimized Design of Multilevel Repetitive Pulse Magnetic Field system
Peiyu TU, Huazhong University of Science and Technology, WuHan, CHINAA large-bore HTS magnet for generating AC magnetic field
Yaohui WANG, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINASession chair: Jun MA
Electromagnetic Characterization of Superconducting Linear Synchronous motor based on Bezier Profile modeling
Jin LI, Southwest Jiaotong University, Chengdu, CHINAA Design Study of Superconducting Planar Motor
Yujia ZHAI, Hunan University, Changsha, CHINAStudy on the dynamic characteristics of stack-type HTS maglev system based on H-formulation
Mingjiang WANG, Western Superconducting Technologies Co., Ltd., Xi'an, CHINADesigning of a testing platform for dynamic stability of superconducting null-flux electrodynamic suspension system
Xiaofen LI, Shanghai Jiao Tong University, Shanghai, CHINADesign and experiment of post-assembly magnetization system for a 160-kW interior permanent-magnet motor
Zhang TU, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINADesign and performance analysis of a HTS homopolar induction machine for more electric aircrafts
Jun MA, University of Bristol, BRISTOL, UNITED KINGDOMModelling of a trapped-flux superconducting motor with the h-phi formulation
Bárbara Maria OLIVEIRA SANTOS, Universidade do Estado do Rio de Janeiro, Rio de Janeiro, BRAZILAn Effective Design and Analysis on the 500 kW HTS DC Motor for High-Torque Electric Propulsion
Jongho CHOI, SuperGenics Co., Ltd., Changwon, KOREA, REPUBLIC OFTrial Test of a 16.9 kW Brushless HTS Synchronous Motor
Wei WANG, Sichuan University, Chengdu, CHINAElectromagnetic characteristics and structural optimization of HTS synchronous motor for electric vehicle
Junfeng YANG, Beijing Jiaotong University, Beijing, CHINASession chair: Xiaoze PEI
Influence of Stator Slotting Effect on the Magnetization and Demagnetization of Stacked Superconductors in a HTS Machine
Qi WANG, University of Cambridge, Cambridge, UNITED KINGDOMFeasibility study of partially and fully superconducting machines for electric aircraft
Yihan WANG, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, CHINAProcess analysis of liquid hydrogen cooling system according to UAM mission profile of fuel cell and battery hybrid eVTOL using HTS
Youngjun CHOI, Changwon National University, Changwon, KOREA, REPUBLIC OFQuench dynamic analysis and fault control for superconducting electrodynamic suspension train
Zhenhua SU, Southwest Jiaotong University, Chengdu, CHINADynamic loss effect electromagnetic analysis of high temperature superconducting(HTS) maglev system
Yuhu BU, School of Mechanical Engineering, Anhui University of Science & Technology, Hefei, CHINAStudy on the stability of zero-flux superconducting electro-dynamic suspension systems with electromagnetic interaction energy surface
Xuanyu LI, Shanghai Jiao Tong University, Shanghai, CHINAPerformance evaluation of superconducting electrodynamic suspension for hyperloop using static experiments
Jungyoul LIM, Korea National University of Transportation, Ui-Wang, KOREA, REPUBLIC OFOff-power REBCO magnets for electrodynamic-suspension running of a prototype vehicle
Wei WU, Shanghai Jiao Tong University; Shanghai Superconductor Technology Co., Ltd., Shanghai, CHINAElectromagnetic Guidance and Levitation Forces between HTS Magnets and Conductive Tubes for Hyperloop
Suyong CHOI, Korea Railroad Research Institute (KRRI), Ui-Wang, KOREA, REPUBLIC OFManufacture and Preliminary Prototype Test of a HTS Suspension Electromagnet for Maglevs
Zou CHUNLONG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAGuidance Force Properties of Attractive Magnetic Levitation System using HTS Bulk
Kota NAKAMURA, Sophia University, Tokyo, JAPANFlux Trapping Implementation in High Temperature Superconducting Magnets for Superconducting Electric Machines
Alexander SMITH, University of Manchester, Manchester, UNITED KINGDOMSession chair: Wilder DURANTE GOMEZ
Influence of the internal magnetic field in the high temperature superconducting flux switched linear motor on the high temperature superconducting coil and its suppression method
Ruiwu CAO, Nanjing University of Aeronautics and Astronautics, Nanjing, CHINAFem-circuit co-simulation of superconducting synchronous wind generators connected to a dc network
Wilder DURANTE GOMEZ, Posgrado en Ingeniería Eléctrica, Universidad Nacional Autónoma de México, Mexico City, MEXICOHTS Synchronous Motor Based On Linear-Motor Type Flux Pump: Brushless Excitation Test Results Under Four Quadrant Control
Peng LIU, Sichuan University, Chengdu, CHINAEffectiveness of REBCO Trapezoidal Armature Coils Used in Superconducting Induction Motors
Masahiko TSUMORI, Kyushu University, Fukuoka, JAPANDesign, construction, and operation of the synchronous motor using bitter plate field winding
Hao MING, Seoul National University, Seoul, KOREA, REPUBLIC OFSimulation model and structure optimization of 500 kVA/10 kV HTS transformer
Wei PI, North China Electric Power University, Beijing, CHINAEnds optimization of superconducting racetrack magnets to improve the performances of HTS wind turbine generators
Zhengwei ZHAO, Guangdong Ocean University, Zhanjiang, CHINAInvestigation on the Charging Characteristics of HTS Bridge for Self-Regulating Flux Pump
Yao ZHAI, Southwest Jiaotong University, chengdu, CHINAOptimizing the Charging Performance of Self-regulating HTS Flux Pump: Magnetic Coupling Enhancement
Yanyu ZHOU, Southwest Jiaotong University, Chengdu, CHINAPulse Field Magnetization (PFM) with Different HTS Stacked Tape Architectures for Electrical Machine
Wei HAIGENING, University of Cambridge, Cambridge, UNITED KINGDOMDesign of a sectional magnet for electromagnetic forming of variable-diameter tubes
Shaowei OUYANG, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINASession chair: Xiaoqiang LAI
High-resolution Detection of Localized Jc inhomogeneity in long-length REBCO Coated Conductor by Combining Magnetic Microscopy and Deep Learning-based Object Detection
Zeyu WU, Kyushu University, FUKUOKA, JAPANImprovement of the thickness uniformity across the width direction of 2G HTS wire.
Hongsoo HA, KERI, Changwon, KOREA, REPUBLIC OFExperimental Research on the Critical Current Characteristics of HTS Cable-In-Conduit Conductor Under the Cyclic Transverse Load
Xiaoqiang LAI, Southwestern Institute of Physics, Chengdu, CHINAThe study of the residual magnetic field in HTS stacked tape conductors
Shuyang GAO, southwest jiaotong university, chengdu, CHINADegradation Behavior and Mechanical Properties of High-Temperature Superconducting Tape with a Vanadium Trioxide Coating
Hyun Sung NOH, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFComparison study of laser and mechanical slitting techniques on electromechanical properties of 2G-HTS tapes
Chunjiang GUO, Shanghai Jiao Tong University, Shanghai, CHINADevelopment of a multi-axis winding technology for saddle coils using ReBCO coated conductors
Seongjin YANG, Pohang Accelerator Laboratory, POSTECH, Pohang, KOREA, REPUBLIC OFSession chairs: Nikolay BYKOVSKIY, Pablo CAYADO
An experimental study on performance of HTS pancake coil under hoop strain using mechanical apparatus
Wonseok JANG, Seoul National University, Seoul, KOREA, REPUBLIC OFCryostat Design for In-Field Critical Current Measurement System with 102 mm 15 T Background Magnet
Sanggap LEE, Korea Basic Science Institute, Cheongju, KOREA, REPUBLIC OFExperimental study on the effect of temperature on high temperature superconducting coils
Jingfeng ZHANG, Institute of Plasma Physics, Hefei Academy of Sciences, Chinese Academy of Sciences, Hefei, CHINAA numerical method based on T-A formulation for calculating dynamic resistance in HTS tapes
Bohan TANG, High Magnetic Field Laboratory, Hefei Institues of Physical Sicence, Chinese Academy of Sciences, Hefei Anhui, CHINADynamic resistance of REBCO coated conductors: the threshold magnetic field and thermal effect
Yueming SUN, Victoria University of Wellington, Lower Hutt, NEW ZEALANDNovel equation for dynamic resistance calculation of REBCO coated conductor in full-range DC transport current
Zhuoyan ZHONG, Shanghai Jiao Tong University, Shanghai, CHINAStudy on dynamic resistance of 2G HTS ReBCO coated conductor
Huaqian XIAO, Hunan University, Changsha, CHINAIntroducing the intelligent new generation of NMR probes: the 1426 and 1526 from Metrolab
Antoine DARIDON, Metrolab Technology, Plan-les-Ouates, SWITZERLANDPulsed wire method for field integral measurement at ssrf
Shudong ZHOU, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, CHINASession chairs: Roland PICCIN, Owen TAYLOR
A Comparative Study on the Dielectric Breakdown Characteristics of Penetration Breakdown and Creepage Discharge under Vacuum Conditions
Jeonghwan PARK, Seoul National University, Seoul, KOREA, REPUBLIC OFEffect of Surface Roughness on Creepage Discharge Characteristics of Insulating Materials under Various Vacuum Conditions
Woocheol SHIN, Korea National University of Transportation, Chungju-si, KOREA, REPUBLIC OFDevelopment of an insulating layer for turn-to-turn resistance of conduction cooled HTS magnet
Insung PARK, Korea Electrotechnology Research Institute, changwon, KOREA, REPUBLIC OFCharacterization of the Mechanical and Thermal Properties, Including Fracture Toughness, of Epoxy Resin System DGEBA / POPDA (D400)
Owen TAYLOR, Siemens Healthineers Magnet Technology, Oxford, UNITED KINGDOMInfluence of thermal conductivity in insulating sheet on stability in conduction-cooled HTS coils
Keito ARATA, Sophia University, Tokyo, JAPANA Study of the Electrical Characteristics of No-Insulation High-Temperature Superconducting Coils Impregnated with an Electrically Conductive Epoxy
Young Jin HWANG, Korea Maritime and Ocean University, Busan, KOREA, REPUBLIC OF13:00
Session chairs: Anna KARIO, Matthew JEWELL
New scaling laws for pinning force density in superconductors
Evgeny TALANTSEV, M N Miheev Institute of Metal Physics, Ekaterinburg, RUSSIAN FEDERATIONIc measurement of REBCO tapes above 1 kA by pulsed current in high field superconducting magnets
Yuji TSUCHIYA, Tohoku Univ., Sendai, JAPANMinimum quench energy in REBCO tapes with induced defects
Christian LACROIX, Polytechnique Montreal, Montreal, CANADAQuench concomitant to Lorentz-force-induced delamination in commercial REBCO coated conductors
Marco BONURA, University of Geneva, Geneva, SWITZERLANDCoupled magnetodynamic-thermal modeling of high temperature superconducting tapes using a mixed h-phifinite element approach for thin shells
Gregory GIARD, Polytechnique Montréal, Montréal, CANADAHigh quality mini cryo permanent magnet of single domain GdBCO bulks prepared by a Gd+011 TSIG technique
Wanmin YANG, Shaanxi Normal University, Xi'an, CHINANew optical magnetometry technique for tesla fields
Hans STÆRKIND, University of Copenhagen & Copenhagen University Hospital - Amager and Hvidovre, Copenhagen, DENMARKSession chairs: Yasuyuki MIYOSHI, Tengming SHEN
Quench protection analysis of 20 T hybrid superconducting dipole magnets for future high-energy particle colliders
Vittorio MARINOZZI, Fermi National Accelerator Laboratory, Batavia, USAQuench performance of the First Pre-series AUP Cryo-Assembly
Maria BALDINI, Fermi National Accelerator Laboratory, Batavia, USAAnalysis of current sharing in rebco coated conductor cables
Michael SUMPTION, The Ohio State University, Columbus, USAQuench protection of high temperature superconducting magnets: The margin of safety and machine learning
Tengming SHEN, Lawrence Berkeley National Laboratory, Berkeley, USADemonstration of a saddle-shaped no-insulation HTS cosine-theta dipole magnet in conduction-cooling operation
Geonyoung KIM, Seoul National University, Seoul, KOREA, REPUBLIC OFCurrent bypassing behaviors during fast-ramping in saddle-shaped REBCO dipole magnet wound with a bundled-conductor
Geonyoung KIM, Seoul National University, Seoul, KOREA, REPUBLIC OFDevelopment of metal-insulated iron-based superconducting coils and charging tests under high magnetic fields up to 32 T
Chunyan LI, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINAFeasibility study of applying the no-insulation coil on accelerator magnets
Rui KANG, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINASession chairs: Iain DIXON, Kohki TAKAHASHI
Commissioning of the 43+T Grenoble Hybrid Magnet
Pierre PUGNAT, LNCMI - EMFL / CNRS / UGA, Grenoble, FRANCECommissioning of the Nijmegen 45 T hybrid magnet.
Andries DEN OUDEN, Radboud University - High Field Magnet Laboratory, Nijmegen, THE NETHERLANDSStability analysis of superconducting outsert in the hybrid magnet system under 45.22 T
Shili JIANG, High Magnetic Field Laboratory, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, CHINANew 60T mid-pulsed and 85T duplex magnets at the pulsed field facility -Los Alamos National Laboratory
Doan NGUYEN, Los Alamos National Laboratory, LOs Alamos, USAStatus of the 100 T project at the Dresden High Magnetic Field Laboratory
Sergei ZHERLITSYN, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, GERMANYSilver-copper composite wires prepared by spark plasma sintering and wire drawing for non-destructive pulsed high magnetic fields
Simon TARDIEU, Laboratoire national des champs magnétiques intenses, Toulouse, FRANCEEffect of Notch Geometry on the Plastic Deformation Behavior of High-strength Conductors
Rongmei NIU, National High Magnetic Field Laboratory, Tallahassee, USAElectromagnetic Buckling Analysis for High Field Pulsed Magnets
Runfen TANG, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINA13:05
Session chairs: Nicolai MARTOVETSKY, Valentina CORATO
Testing of the ITER CS module #4
Nicolai MARTOVETSKY, ORNL, Oak Ridge, USAThe SPARC Tokamak Central Solenoid Model Coil
Charlie SANABRIA, Commonwealth Fusion Systems, Devens, USAAn overview of the HTS magnet systems required for the our next advance prototype fusion device
Rod BATEMAN, Tokamak Energy, Abingdon, UNITED KINGDOMR&D Needs and Roadmaps for a US Fusion Magnet Base Program
Yuhu ZHAI, Princeton Plasma Physics Laboratory, Princeton, New Jersey, USAEngineering design and analysis of CFETR TF coil
Jinxing ZHENG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAUpdated design of the Central Solenoid for the DTT tokamak
Luigi MUZZI, ENEA, Frascati, ITALY14:30
16:30
2PoA - Poster sessions
Session chairs: Paolo FERRACIN, Stefania FARINON
Magnetic and Mechanical Design of a 15-T Hybrid NbTi-Nb3Sn-REBCO Dipole Magnet with Large Aperture for a Multi-Field Test Facility
Ming Zhi GUAN, Institute of Modern Physics, Chinese Academy of Science, Lanzhou, CHINAConceptual design of a target and capture channel for a muon collider
Alfredo PORTONE, Fusion For Energy, Barcelona, SPAINDesign of the Utility Magnet Structure for testing CCT6 and SMCT Nb3Sn magnets
Mariusz JUCHNO, Lawrence Berkeley National Laboratory, Berkeley, USAMechanical structure analysis of a 16 T CCT magnet
Zhilong HOU, Institute of High Energy Physics, CAS, Beijing, CHINAMechanical analysis and design of the 15 T hybrid superconducting dipole magnet
Qiang HU, Institute of Modern Physics, Chinese Academy of Sciences, LanZhou, CHINANew mechanical layout for the 12 T, Nb3Sn, cosθ short model: Falcon Dipole
Nicola SALA, INFN Genova, Genoa, ITALYDesign of a common coil magnet using existing racetrack model coils (RMC)
Jesús ángel GARCÍA-MATOS, CIEMAT (Centro de Investigaciones Energéticas Medioambientales y Tecnológicas) and ICAI School of Engineering, Comillas Pontifical University, Madrid, SPAINTowards conceptual design of the final cooling solenoid for a muon collider
Alexey DUDAREV, CERN, Geneva 23, SWITZERLANDSession chairs: Vadim KASHIKHIN, Tatsushi NAKAMOTO
Research on measurement methods for large warm-iron superconducting dipole magnet in HIAF-HFRS
Zidi WU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINAMagnetic field measurement of 2GeV FFAG accelerator 1:4 scaled model magnet
Hongji ZHOU, China Institute of Atomic Energy, Beijing, CHINAMagnetic measurements and alignment results of LQXFA cold mass assemblies at Fermilab
Joseph DIMARCO, Fermi National Accelerator Laboratory, Batavia, USAMagnetic measurement of superconducting transport solenoid for COMET
Yasushi ARIMOTO, High Energy Accelerator Research Organization, Tsukuba, JAPANField quality analysis of the separation-recombination dipole MBRD for the High-Luminosity upgrade of LHC
Alessandra PAMPALONI, INFN - Genova, Genoa, ITALYEvaluation of Magnetic Performance of Superconducting Magnets for the Superconducting Fragment Separator at FAIR
Eunjung CHO, GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, GERMANYMagnetic measurement with single stretched wire method on HEPS magnets
Mei YANG, Institute of high energy physics,CAS, Beijing, CHINAA new large scale measurement campaign at Fermilab
Michael TARTAGLIA, Fermi National Accelerator Laboratory, Batavia, USAMeasurement setup and magnetic field studies of a compact superconducting undulator with laser-structured HTS tapes
Bennet KRASCH, Karlsruhe Institute of Technology, Karlsruhe, GERMANYThe magnetic field measurement of the quadrupole magnet in BRing of HIAF
Jing YANG, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINASession chairs: José LORENZO, Daniel BIEK
The preload structure analysis of CFETR CSMC under reference scenarios
Xianwei WANG, Jiangsu University of Technology, Changzhou, CHINAITER TF Pre-Compression Ring Tightening Analysis
Luigi RECCIA, Fusion for Energy, Barcelona, SPAINAlternative design of the EU DEMO Central Solenoid
Xabier SARASOLA, EPFL-SPC, Villigen PSI, SWITZERLANDFatigue sensitivity studies of the DEMO Central Solenoid lifetime
Xabier SARASOLA, EPFL-SPC, Villigen PSI, SWITZERLANDDesign optimization of the supporting structures for the dtt tf and pf coil systems
Gherardo ROMANELLI, Tuscia University, Roma, ITALYPreliminary design and electromechanical analysis of a Winding Pack for high field helias magnets
Daniel BIEK, EPFL-SPC, Villigen PSI, SWITZERLANDThe magnet systems for the FUTURE machine: a parametric design study
Lorenzo GIANNINI, ENEA, Frascati, ITALYThe PF sizing macro-block for the MAgnet Design Explorer (MADE) algorithm
Lorenzo GIANNINI, ENEA, Frascati, ITALYSession chairs: Mio NAKAMOTO, Yasuyuki MIYOSHI
The magnets operation aimed for mega-ampere plasma of HL-2M tokamak
Xiaolong LIU, Southwestern Insititute of Physics, Chengdu, CHINAPROGRESS towards Demo4 - the world’s first high field HTS magnet in a spherical tokamak configuration.
Greg BRITTLES, Tokamak Energy, Abingdon, UNITED KINGDOMInstallation progress of the Central Solenoid (CS) on ITER site
Tao JIANG, Southwestern Institute of Physics, CHENGDU, CHINAStatus and Progress on First-of-a-Kind Feeder Junction Assembly of ITER Magnet System
Hyungjun KIM, ITER Organization, Saint-Paul-lez-Durance, FRANCEHigh temperature superconducting REBCO coated conductors for ultra-high-field fusion: from compact to large-scale fuson reactors
Xiaodong LI, Technische Universität München (TUM), Germany, Munich, GERMANYProgress towards a 10-kA HTS flux pump for fusion TF magnets at Paihau-Robinon Research Institute
James H. P. RICE, Victoria University of Wellington, Lower Hutt, NEW ZEALANDITER correction coil and magnet feeder on-site installation lessons learned
Chen LIU, Institute of plasma physics, Chinese Academy of Sciences, Hefei, CHINACompletion of the ten insertions and cold tests of the European Toroidal Field Coils for ITER: lesson learned
Boris BELLESIA, Fusion for Energy, Barcelona, SPAINDelivered poloidal field coils to ITER fusion tokamak facility: status, factory acceptance test results and overview of the undergone electrical tests in manufacturing processes
Monica MARTINEZ LOPEZ, Fusion for Energy, Cadarache, FRANCEStatus of the top plate and anticryostat for high field cable test facility at fermilab
Vlad NIKOLIC, Fermi National Accelerator Laboratory, Batavia, USAITER TF Load Transfer and Pre-compression assembly process development
Naoki SAWA, ITER Organization, Manosque, FRANCESession chair: Konrad RISSE
High voltage Signal Conditioner for the ITER superconducting magnet Quench detection system
Seungje LEE, ITER, Saint-Paul-lez-Durance, FRANCEDesign of Quench Protection Circuit for the Superconducting Conductor Experiment Magnet
Seokho NAM, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFSimulations of large minimally insulated hts magnets
Peter TITUS, Princeton Plasma Physics Laboratory, Princeton, USAAn experiment on radiation induced attenuation at cyrogenic temperatures with active optical annealing
Owen DUKE, Commonwealth Fusion Systems, Devens, USADevelopment of a thermal-hydraulic and electric model for no-insulation large-scale coils
Andrea ZAPPATORE, Politecnico di Torino, Dipartimento energia, Torino, ITALYFusion magnet quench risk increase with radiation damage
Jacob JOHN, UKAEA, Abingdon, UNITED KINGDOMQuench detection circuit using a non-earthed high-voltage divider array for the KSTAR TF coils
Hirofumi YONEKAWA, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFSession chair: Rongmei NIU
Transverse tensile, compression and in-plane shear strength of ZYLON/epoxy composite
Siyuan CHEN, Huazhong University of Science and Technology, Wuhan, CHINAInternal stress anisotropy in high-strength CuAg conductor
Hongyu BAI, florida state university, Tallahassee, USAStudy of high strength and high conductivity Copper-Niobium composite wire for high field pulsed magnets
Pengfei WANG, Northwest Institute for Non-ferrous Metal Research, Xi 'an, CHINAOptimization of PBO fiber thickness for high field pulsed magnets
Shuang WANG, Huazhong University of Science and Technology, Wuhan, CHINAThe Mechanical Behavior of Fiber Composites in Pusled High-field Magnets
Siyuan CHEN, Huazhong University of Science and Technology, Wuhan, CHINAFabrication of high strength and high conductivity Cu-Nb composite wires with for high field pulsed magnets
Pengfei WANG, Northwest Institute for Non-ferrous Metal Research, Xi 'an, CHINACharacterization of microstructure of high-strength CuAg after service
Ke HAN, florida state university, Tallahassee, USASession chairs: Xavier CHAUD, Christophe TROPHIME
Design of a 42 T Resistive Magnet at the CHMFL
Zhen FANG, The High Magnetic Field Laboratory of the Chinese Academy of Sciences (CHMFL), Hefei, CHINARedesign of large Bitter magnet coils at the LNCMI
Frans WIJNEN, Radboud University - High Field Magnet Laboratory, Nijmegen, THE NETHERLANDSTest Operations of the Upgraded Hybrid Magnet at CHMFL
Pengcheng HUANG, High Magnetic Field Laboratory, Chinese Academy of Sciences., Hefei, Anhui, CHINADesign of the cooling water system upgrade for 42T resistive magnet at the CHMFL
Tang JIALI, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, CHINASession chairs: Jang-Hee YOON, Yasuyuki MIYOSHI
Low ac loss HTS wire, cable, and coil with the Bi2212 superconductor for stator applications
Alexander OTTO, Solid Material Solutions, LLC, North Chelmsford, USAMeasurements of the induced current in REBCO rotor with air core in the induction motor
Akifumi KAWAGOE, Kagoshima University, Kagoshima, JAPANA study on the design of LH2 cooling system for 100 kW-class LH2–HTS electric propulsion system
Kihwan KIM, Changwon National University, Changwon, KOREA, REPUBLIC OFAC Loss Characteristics of HTS Field Winding for Synchronous Motor According to Stator Configuration
Jonghoon YOON, Seoul National University, Seoul, KOREA, REPUBLIC OFCalculation of AC loss in the ReBCO stator of a high-dynamic linear motor using an experimentally verified model
Herman TEN KATE, University of Twente, , THE NETHERLANDSComparative analysis of iron loss in laminated topology of different modular stator grain oriented electrical steels at low temperature
Yuechao MA, Shenyang University of Technology, Shenyang, CHINAReluctance mesh-based magnetic equivalent circuit model of a High Temperature superconductor hybrid synchronous machine
Frederic TRILLAUD, Universidad Nacional Autónoma de Mexico, , MEXICOMulti-physics analysis of ReBCO magnets for high temperature superconducting electrical machine
Xuezhi LUO, Hunan University, Changsha, CHINAAC loss calculation of racetrack-shaped HTS-excitation magnet for electrical machine considering end part
Mingzhe SANG, Qingdao University, Qingdao, CHINAOptimal Design of Resonance Circuit Topology for a Wireless Power Transmission using HTS coils
Ryota INOUE, Okayama University, Okayama, JAPANSimulation study on AC loss of HTS magnet for multi-module suspension power supply system
Zhiqiang ZHENG, Hunan University, CHINA CHANGSHA CITY, CHINASession chairs: Qing SHAO, Koji KAMIYA
Dynamical magnetic resistance of high-Tc superconducting maglev vehicle
Yong ZHAO, Fujian Normal University, Fuzhou, CHINAAn experimental study on the dynamic resistance of a REBCO magnet during quasi-persistent operation for Maglev trains under harmonic magnetic fields
Jeongmin MUN, Changwon National University, Changwon-si, KOREA, REPUBLIC OFTransient Thermal Analysis And Experimental Study Of The Closed-loop 2G HTS Magnets Without Insulation Of Superconducting Maglev
Qing SHAO, CRRC Changchun Railway Vehicles Co., Ltd., Changchun, CHINACoupling characteristics study on propulsion and levitation systems in the superconducting electrodynamic suspension train
Hongfu SHI, Southwest Jiaotong University, Chengdu, CHINADesign and Thermal Stability Calibration of Superconducting Toroidal Magnets for 20MJ/5MW LIQHYSMES
Yifeng QIU, Huazhong University of Science and Technology, Wuhan, CHINAElectromagnetic-thermal-mechanical numerical analysis of a 150 kJ high temperature superconducting magnets
Zhixing YANG, Huazhong University of Science and Technology, Wuhan, CHINAAC loss reduction of the HTS cable with striations
Miyeon YOON, Tech University of Korea, Siheung-si, KOREA, REPUBLIC OFDevelopment of a compact superconducting magnet system for magnetic refrigeration
Koji KAMIYA, National Institute for Materials Science, Tsukuba, JAPANStudy on Thermal and Force Stability of 10 MJ HTS-SMES Magnet
Xinyu ZOU, Huazhong University of Science and Technology, Wuhan, CHINASession chair: Zhao XIAN-FENG
100% quality control of permanent magnets for industrial and research applications
Matthias SCHMIDT, Matesy GmbH, Jena, GERMANYMagnetic Assembly Tools, a digital twin for permanent magnet based undulator assemblies
Gaël LE BEC, ESRF - The European Synchrotron, Grenoble, FRANCESensitivity of non-ideal high temperature superconducting permanent magnet orbits to permanent magnet defects
Zhao XIAN-FENG, Lanzhou Jiaotong University, Lanzhou, CHINAField harmonic measurement of high-gradient permanent magnet quadrupoles for NSLS- II Upgrade
Charles KITEGI, Synchrotron SOLEIL, Saint-Aubin, FRANCEAxisymmetric Uniform Field Generation using Permanent Magnet
Yoshihisa IWASHITA, Kyoto University, Sennan-gun, JAPANInvestigation on saturated magnetization characteristics of anisotropic NdFeB permanent magnet in post-assembly magnetization application
Yiliang LV, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINAStudy of magneto-electric properties of Nd1-xRxFeO3 system (R: Sm, Eu, Er, Pr, Gd, and Y)
Adolfo QUIROZ RODRÍGUEZ, Universidad Tecológica de Xicotepec de Juarez, Xicotepec de Juárez, MEXICOResearch on magnetic pulse compaction behavior of hard magnetic powder
Yiliang LV, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINAMagnetic Levitation for Density-Based Measurement using Asymmetry Cylindrical Magnets
Liangyu XIA, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, wuhan, CHINASession chairs: So NOGUCHI, Andrea MUSSO
Investigation on the thermal characteristics of no insulation and metal insulation HTS racetrack coils
Junil KIM, Korea Electrotechnology Research Institute, Changwon, KOREA, REPUBLIC OFEvaluation of thermal stability of REBCO pancake coils with partially noncontact areas between winding turns
Kazuki AMANO, Waseda University, Tokyo, JAPANSimple and versatile evaluation method of thermal stability of NI HTS magnets during quench event
Takanobu MATO, Hokkaido University, Sapporo, JAPANOver Current Test on a Partial-Electrical-Connector HTS Coil with Paraffin Impregnation
Wooseung LEE, Korea Basic Science Institute, Cheongju, KOREA, REPUBLIC OFThe roles of contact resistance and conductor resistance in an NI HTS coil
Andrea MUSSO, RSE S.p.A., Milan, ITALYStudy on terminal joint resistance and current distribution in parallel co-wound no-insulation HTS coil.
Weihang PENG, Shanghai Jiao Tong University, Shanghai, CHINAStudy on charging strategy for no insulation multi-coil magnet system
Songling LI, Shanghai Jiao Tong University, Shanghai, CHINAMagnetization characteristics of trapped field HTS Coils with soldered joints
Hengpei LIAO, University of Strathclyde, Glasgow, UNITED KINGDOM16:00
18:00
Superconductivity Global Alliance (ScGA) Initiative Overview
Ziad MELHEM, Oxford Quantum Solutions Ltd, , UNITED KINGDOMScGA - Strategic Roadmap of Grand Challenges in Fusion
Neil MITCHELL, ITER Organization, Saint-Paul-lez-Durance, FRANCEScGA - Strategic Roadmap of Grand Challenges in Power, Industry & Transport
Sastry PAMIDI, FAMU-FSU College of Engineering and the Center for Advanced Power Systems, Tallahassee, USAScGA - Strategic Roadmap of Grand Challenges in Healthcare
Kathleen AMM, Brookhaven National Laboratory, Upton, USAScGA - Strategic Roadmap of Grand Challenges in Smart Science
Mark BIRD, NHMFL - FSU, Tallahassee, USAScGA - Strategic Roadmap of Grand Challenges in Materials for Magnet Applications
Venkat SELVAMANICKAM, University of Houston, AMPeers LLC, Houston, USASession chairs: Jinxing ZHENG, Christine HOA
Status of the qualification and manufacture of the ITER in-vessel coils
Alexander VOSTNER, ITER, Saint-Paul-lez-Durance, FRANCEConstruction and application of large superconducting magnet performance research platform
Liang GUO, Institue of Plasma physics,Chinese Academy of Sciences, Hefei, CHINA35 years of TF Magnet System operation in Tore supra / WEST : Status and Lessons learnt
Sylvain GIRARD, CEA, Saint-Paul-lez-Durance, FRANCEThe OpenStar HTS levitated dipole concept
Hubertus WEIJERS, Paihau-Robinson Research Institute, Victoria University of Wellington, Lower Hutt, NEW ZEALANDDesign and mechanical analysis of a HTS CS coil for the next generation fusion reactor
Xiaogang LIU, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAPreliminary Design Study on HTS Toroidal Field Coil Shape for High Magnetic Field Spherical Tokamak
Shailendra CHOUHAN, UKAEA, Abingdon, Oxfordshire, UNITED KINGDOMAcceptance Test and Delivery of Pre-Compression Rings for ITER Magnet System
Yury ILIN, ITER Organization, Saint-Paul-lez-Durance, FRANCEResearch and development of the joint for the ITER in-vessel coil
Qiangwang HAO, Institute of Plasma Physics,Chinese Academy of Sciences, Hefei, CHINASession chairs: Kathleen AMM, Michinaka SUGANO
Training performance and magnetic measurements during vertical testing of the MQXFA magnets for HL-LHC
Anis BEN YAHIA, Brookhaven National Laboratory, Upton, USATowards MQXFB series coils
Nicholas LUSA, CERN, Meyrin, SWITZERLANDTest results of the first series magnet of beam separation dipole for the HL-LHC upgrade
Kento SUZUKI, High Energy Accelerator Research Organization, Tsukuba, JAPANThe Development of MBRD Magnets, the Separation/Recombination Dipoles for the LHC High Luminosity Upgrade
Stefania FARINON, INFN, Genoa, ITALYPowering test results of the first batch of mcbxfb magnets produced at industry
Luis GONZALEZ, CIEMAT, Madrid, SPAINTransients and coil displacement in accelerator magnets
Gerard WILLERING, CERN, Geneva, SWITZERLANDEffect of intentionally introduced strand damage in the Nb3Sn Rutherford cable on the performance of a short racetrack magnet
Ruben KEIJZER, University of Twente, Enschede, THE NETHERLANDSFabrication and test of the fourth prototype of the D2 orbit corrector dipole for HL-LHC
Veronica ILARDI, CERN, Geneva, SWITZERLANDSept. 13th, 2023
08:15
09:45
Session chairs: Arnaud DEVRED, Pierre VEDRINE
Magnet Technology for the Next Generation of High Energy Physics Accelerators: Meeting the Performance Needs
Mike LAMONT, Accelerators and Technology, CERN, Geneva, SWITZERLANDProgress and plans for the US Magnet Development Program
Soren PRESTEMON, Lawrence Berkeley National Laboratory, Berkeley, USA11:30
3PoM - Poster sessions
Session chair: Nicola MARIANI
Demonstration of the industrial production and inspection proces for the react-and-wind conductors of the EU DEMO
Xabier SARASOLA, EPFL-SPC, Villigen PSI, SWITZERLANDR&D on terminations sealing for ITER in-vessel vertical stability coils conductor.
Nicola MARIANI, ITER, Saint-Paul-lez-Durance, FRANCEAnalysis of critical current and hot spot behavior in BSCCO stacked-tape cable for fusion reactor
Yunpeng ZHU, Southwestern Institute of Physics, Chengdu, CHINACritical current characterization and current distribution in HTS cables
Xinbo HU, Southwestern Institue of Physics, Chengdu, CHINAA YBCO Cable-in-Conduit Conductor for Fusion Magnet Application
Zuo JIAXIN, Southwestern Institute of Physics, ChenDu, CHINAInvestigation of twist pitch to suppress unbalanced current in a Cable-in-conduit conductor
Ryota SATO, Chiba University, Chiba, JAPANRemountable feltmetal joints for HTS CORC® fusion magnets
Jack GREENWOOD, United Kingdom Atomic Energy Authority, Sheffield, UNITED KINGDOMHIP effect on mechanical strength of the internal matrix reinforced Nb3Sn multifilamentary wires using various ternary bronze alloy matrices
Yoshimitsu HISHINUMA, National Institute for Fusion Science, Toki, JAPANConceptual Design of a HTS CICC Coil for Future Fusion Devices based on Bi-2223 Tapes
Yunfei TAN, Huazhong University of Science and Technology, WuHan, CHINASession chair: Vladimir TRONZA
APECS: an analytical equations toolkit for magnet design and electromagnetic analysis
Alexander PETROV, UKAEA, Abingdon, UNITED KINGDOMNovel Strand Position Detection System Using Thermistor Array For Next Generation Large Fusion Magnet Cable-In-Conduit Conductors
Sohta HOSHINO, Sophia University, Tokyo, JAPANCritical current correlations across the superconducting surface of REBCO Wires, B||C
Aliya GREENBERG, Commonwealth Fusion Systems, Devens, USADesign of magnet performance test device for toroidal field coil of cfetr
Xiuhe SONG, Institue of Plasma Physics,Chinese Academy of Sciences, Hefei, CHINADevelopment of a 100kA superconducting transformer for Super-X Test facility
Ma HONGJUN, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINASimulation of Quench in DC Magnet of Super-X Test Facility Using a Quasi-three-dimensional Model
Libiao HU, Institute of Plasma Physics, Chinese Academy of Sciences, hefei, CHINACooling design and analysis of the magnet system for the Super-X test facility
Qiangwang HAO, Institute of Plasma Physics,Chinese Academy of Sciences, Hefei, CHINALessons Learnt from the use of the Manufacturing Database for the ITER Magnet System
Vladimir TRONZA, ITER Organization, Saint-Paul-lez-Durance, FRANCEDesign and construction of a test rig for cryogenic in-situ gamma irradiation testing of energised HTS coils at fusion-relevant temperatures.
Vicky BAYLISS, Tokamak Energy, Milton Park, UNITED KINGDOMTest and analysis of performance of the Cable-in-Conduit Conductors for Super-X Test Facility
Yun Hao LIU, Institute of Plasma Physics, Chinese Academy of Sciences, HEFEI, CHINAThe conductor integrating facility and manufacturing of CFETR TF prototype coil
Chao DAI, Institute of Plasma Physics, Chinese Academy of Sciences, HEFEI, CHINASession chair: Kwangmin KIM
77 K Electro-Mechanical Properties Characterization of 12 mm wide REBCO Tapes Made By Three Manufacturers
Robert WALSH, Florida State University, Tallahassee, USAOverview of the measurement techniques for determining the strain behavior of the superconducting magnets
Ming Zhi GUAN, Institute of Modern Physics, Chinese Academy of Science, Lanzhou, CHINAExperimental and analytical study on contact resistance and current distribution of NI HTS coils in low-frequency AC method
Seokbeom KIM, Okayama University, Okayama, JAPANMeasuring critical current density of 2G superconducting tapes in magnetic fields up to 60T
Doan NGUYEN, Los Alamos National Laboratory, LOs Alamos, USAThe fabrication and operation test of YBCO binary current leads developed for a NI YBCO magnet
Hengkang ZHENG, Huazhong University of Science and Technology, Wuhan, CHINACurrent leads test for fecr cryostat
Xudong WANG, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINASession chair: Alessio D'AGLIANO
Mechanical behavior of HTS tapes during bending: FEM simulations and measurements
Hamed MILANCHIAN, Tampere university, Tampere, FINLANDModeling of Bi2212 strand and Rutherford cable for dipole coil insert.
Alessio D'AGLIANO, INFN - Sezione di Pisa, Pisa, ITALYManufacture and analyses of Bi-2212 wind & react insert coil with a 14T background magnetic field testing at helium temperature
H J ZHU, ASIPP, Heifei, CHINAStudy of Transverse Stress Effects on the Critical Current of Bi-2223/Ag HTS Tapes
Yunfei TAN, Huazhong University of Science and Technology, WuHan, CHINAMultiscale modelling and simulation on the delamination of the REBCO coated conductors in the high-field superconducting magnets
Ze JING, Institute of Extreme Mechanics and School of Aeronautics, Northwestern Polytechnical University, Xi 'an, CHINAModelling the effects of twist pitch on the elastoplastic damage of multifilamentary Nb3Sn superconducting strand under cyclic load
Ze JING, Institute of Extreme Mechanics and School of Aeronautics, Northwestern Polytechnical University, Xi 'an, CHINAFinite element investigation into axial strain tests on REBCO cable
Peter MOORE, Tufts University, Medford, USAStress transfer mechanism and shear strength of multilayer composite superconducting tape
Wurui TA, Lanzhou University, Lanzhou, CHINASession chairs: Hiroshi UEDA, Helmut SOLTNER
Design study of a coil configuration for a lightweight superconducting magnet in heavy-ion beam rotating gantry
Tetsuhiro OBANA, National Institute for Fusion Science, Toki, JAPANStructural analysis of a 4-layer curved alternating gradient canted-cosine-theta magnet applied to a light-weight gantry
Chen AOTE, Huazhong University of Science and Technology, China Wuhan, CHINADesign and characterization of a large curved window frame magnet for wide-angle scattering experiments with polarized neutrons
Helmut SOLTNER, Forschungszentrum Jülich GmbH (FZJ), Jülich, GERMANYElectromagnetic structure design of 14T MRI back field magnet winding
Xu AIHUA, Changzhou Vocational Institute of mechatronic Technology, Changzhou, CHINAMechanical and seismic performance analysis of 14 T MRI
Xu AIHUA, Changzhou Vocational Institute of mechatronic Technology, Changzhou, CHINAMechanical design of the 4 T curved demonstrator dipole for the SIG gantry
Filippo LEVI, INFN, Genova, ITALYExperiment and simulation on mechanical behavior in 1/2-scale demonstration REBCO coil system of Skeleton Cyclotron for cancer therapy
Hiroshi UEDA, Okayama University, Okayama, JAPANA Novel High-temperature Superconducting Double-Hole Structure Magnets for Persistent Current Mode Operation
Hao DONG, Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Science;University of Chinese Academy of Sciences, Beijing, CHINADevelopment of enclosed jointless coils with REBCO coated conductors for persistent current mode magnets
Ding FAZHU, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAPreparation and Properties of MgB2 Superconducting Wire with Rectangular Cross-section for MRI
Li CHAO, Xi'an Superconducting Magnet Technology Co., Ltd., Xi'an, CHINASession chairs: Minfeng XU, Yoshinori YANAGISAWA
AC loss evaluation of Nb3Sn and Bi-2212 coils for a liquid-helium-free fast-switching-field MRI magnet
Jaeyun KIM, Massachusetts Institute of Technology, Cambridge, USAPractical and cost-effective cryogenic tank designs for closed-loop cooled superconducting magnets
Minfeng XU, GE Research, Niskayuna, USAThermal design of 6T HTS MRI magnet based on test results of a module coil
Yonghyun KWON, SuperGenics. Co., Ltd., Changwon, KOREA, REPUBLIC OFThermal analysis of a head-only 1.5T magnetic resonance imaging superconducting magnet
Jianglan LI, Huazhong University of Science and Technology, Wuhan, CHINAPreliminary design of superconducting gantry magnet for miniaturized heavy-ion therapy facility
Yi ZHU, Jiafu Accelerator Ion Therapy Co., LTD., Hangzhou, CHINAMechanical and thermal analysis of a cueved DCT superconducting magnet for for proton therapy
Wei YOU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINAQuench protection design of a Head-only 1.5 T MRI superconducting magnet
Zhiwen CHENG, Huazhong University of Science and Technology, Wuhan, CHINADesign and analysis of a quench preventive method for the MIT 1.3 GHz NMR magnet under fault modes
Dongkeun PARK, Massachusetts Institute of Technology, Cambridge, USAEvaluation of transient thermal stability of 1/2-scale demonstration no-insulation REBCO coil system of skeleton cyclotron for cancer therapy
Taro NAKAMURA, Waseda University, Tokyo, JAPANDevelopment of an intra-Layer No-Insulation (LNI) REBCO coil with an ultra-high contact resistivity
Yuya TANAKA, Sophia University, Chiyoda, JAPANAnalysis on the Electrical Breakdown Characteristics for Improving the Dielectric Stability of a Superconducting Magnet
Jeonghwan PARK, Seoul National University, Seoul, KOREA, REPUBLIC OFSession chairs: So NOGUCHI, Enrico FELCINI
Design study of a superconducting dipole magnet for multiple-angle beam irradiation applied to a compact proton therapy system
Ziyi YANG, Huazhong University of Science and Technology, Wuhan, CHINADesign of a head-only 1.5t magnetic resonance imaging superconducting magnet
Yunxing SONG, Huazhong University of Science and Technology, Wuhan, CHINANumerical evaluation of screening current-induced magnetic field in 1/2-scale demonstration No-Insulation REBCO coil system of skeleton cyclotron for cancer therapy
Ota KAITO, Waseda University, Tokyo-to, JAPANEM design and innovative winding technique for a 4 T high curvature superconducting dipole in block coil configuration for next generation ion gantries
Andrea GAGNO, INFN and University of Genoa, Genoa, ITALYNon-invasive deep brain interference magnetic stimulation via parametric characterized spatial array
Xiao FANG, Chengdu University of Technology, Chengdu, CHINAA Feasibility Study on Multiple Ferromagnetic Shimming for a Large-Bore 9.4 T Non-NMR LTS Magnet
Hongmin YANG, Korea Basic Science Institute, Cheongju, KOREA, REPUBLIC OFHTS coil and HTS bulk arrangement suitable for two-dimensional navigation of magnetic drugs for MDDS
Shohei NOJIMA, Tohoku University, Sendai-city, JAPANSession chair: Xiaoze PEI
Green hydrogen liquefaction using high field HTS magnets
Christian R. H. BAHL, Subra A/S, Farum, DENMARKEffect of eddy currents on the particle trajectory of magnetic fine particles during dry high gradient magnetic separation
Haozhou CHEN, Tokyo Metropolitan University, Tokyo, JAPANThe design study on the performance of high-temperature superconducting （HTS） flywheel system in magnetic field above 10 T
Rui MA, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINACombining MgB2 SMES and Supercapacitor with batteries for innovative Energy Storage Systems: the V-Access project.
Matteo TROPEANO, ASG Superconductors, Genova, ITALYExperimental SMES with quasi-force-free winding
Andrey MEDNIKOV, JSC NIIEFA, Saint-Petersburg, RUSSIAN FEDERATIONNovel grid forming SMES with multi-functional application
Wenyong GUO, Beijing Jiaotong University, Beijing, CHINADesign of superconducting magnetic energy storage (SMES) for waterborne applications
Carlos HERNANDO, CYCLOMED TECHNOLOGIES S.L., Madrid, SPAINSession chairs: Masanori DAIBO, Christopher REIS
Revealing the effect of thermodynamical parameters for Bi22122 heat treatment
Zhenchuang ZHANG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAInfluence of pre-densification method on Bi-2212/Ag-alloy multifilamentary round wires
Wenge CHEN, High Magnetic Field Laboratory, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, CHINAEffects of neutron irradiation on REBCO coated conductors for future compact fusion magnet systems.
Christopher REIS, Lawrence Berkeley National Laboratory, Berkeley, USAAg-diffusion bonding preparation of double-layer YBCO tapes to enhance engineering current density and surface micromorphology analysis
Hao DONG, Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Science;University of Chinese Academy of Sciences, Beijing, CHINAEnhancement of critical current densities by co-doping with Zr, Hf, Sn and Ce for Gd123 thin films fabricated by fluorine-free MOD method
Ryota ISHII, Tokyo Metropolitan University, Tokyo, JAPANMelt growth of YBa2Cu3O7-δ by using BaCu2O2 and Y2BaCuO5 in Ag-sheath
Geng ZHIHUI, Tokai Universuty, Hiratsuka, JAPANFormation mechanism of a-axis oriented grains in GdBa2Cu3Oy coated conductors deposited by pulsed laser deposition
Ryo TERANISHI, Kyushu University, Fukuoka, JAPANStudy on the Analysis of the Transport-Current Characteristics of Thin-film-type Superconducting Wire with Improved Performance by Plasma Pre- and Post-Processing Process
Hoik DU, Jeonbuk National University, Jeonju-si, KOREA, REPUBLIC OFSession chair: Frederic TRILLAUD
Recent progress in HTS flux pumps
Jianzhao GENG, Huazhong University of Science and Technology, Wuhan, CHINAFeasibility study of a cryogenic power supply for superconducting DC devices
Lauro FERREIRA, Université Paris-Saclay, CentraleSupélec, GeePs, Gif-sur-Yvette, FRANCEResearch progress and development trend of conduction-cooled HTS flux pump
Chunran MU, Hunan University, Changsha, CHINALimitations of the DC Output Voltage from HTS flux pumps
Jintao HU, University of Cambridge, Cambridge, UNITED KINGDOMPersistent Current Mode Operation of a Conduction Cooled YBCO Magnet at 30 K with a Linear-Motor Type Flux Pump
Peng LIU, Sichuan University, Chengdu, CHINAThe flux pumping behavior of high temperature superconducting tapes with a linearly moving electromagnet
Yanbo BI, Shanghai Jiaotong University, Shanghai, CHINAA long distance coupling self-rectifier flux pump for charging HTS magnets
Yi LIN, Huazhong University of Science and Technology, WuHan, CHINATesting of a pair of 10 kA ternary current leads
Connor BOWERMAN, Texas A&M University, College Staion, USAPerformance Test of Through-wall Excitation Flux Pump at Different Temperatures
Chenghuai WU, Sichuan University, Chengdu, CHINA13:00
Session chairs: Arnaud DEVRED, Giorgio AMBROSIO
On the CCT Option for the FCC-hh Main Dipole Magnet
Bernhard AUCHMANN, Paul Scherrer Institute/CERN, Villigen, SWITZERLANDDevelopment and test of a large-aperture Nb3Sn cos-theta dipole coil with stress management
Igor NOVITSKI, Fermi National Accelerator Laboratory, Batavia, USADesign, fabrication and preliminary performance test of LPF3: a combined superconducting dipole magnet towards 16 T
Chengtao WANG, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINATest results of the first wax-impregnated, Nb-Ti canted cosine theta septum magnet "SuShi"
Daniel BARNA, Wigner Research Centre for Physics, Budapest, HUNGARYDevelopment of Hybrid Dipole Magnets for Particle Accelerators by the US Magnet Development Program
Paolo FERRACIN, Lawrence Berkeley National Laboratory, Berkeley, USAMEASUREMENTS and simulations of electromagnetic behavior of non-insulated ReBCO pancake coils with single or double tape turns, dry wound or solder filled
Anna KARIO, University of Twente, Enschede, THE NETHERLANDSHigh-performance REBCO conductors and cables for high magnetic field applications
Venkat SELVAMANICKAM, University of Houston, AMPeers LLC, Houston, USASession chairs: Pierluigi BRUZZONE, Kazuya HAMADA
Toward the completion of the production in Europe of the 10 ITER Toroidal Field coils and 5 ITER Poloidal Field Coils: main lesson learned during the 15 years long journey
Alessandro BONITO OLIVA, Fusion for Energy, Barcelona, SPAINCompletion of all nine ITER toroidal field coils in Japan
Mio NAKAMOTO, National Institues for Quantum Science and Technology, Naka, JAPANProgress of ITER Central Solenoid Assembly
Carl CORMANY, ITER Organization, Saint-Paul-lez-Durance, FRANCEManufacturing Progress of Winding Pack for CFETR TF Prototype Coil
Wei WEN, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031, People’s Republic of China, Hefei, CHINAHTS Magnet Development Program at Renaissance Fusion
Carlo SBORCHIA, Renaissance Fusion, Grenoble, FRANCECompletion of manufacturing and factory acceptance testing of ITER PF1 Coil
Yury ILIN, ITER Organization, Saint-Paul-lez-Durance, FRANCEThe Superconducting, Minimum-Aspect-Ratio Torus
Carl WEGGEL, Kronos Fusion Energy, Andover, USASession chairs: Fedor GÖMÖRY, Andrea MUSSO
Selected challenges in design and performance estimation of HTS magnet
Seungyong HAHN, Seoul National University, Seoul, KOREA, REPUBLIC OFRobotic winding of HTS coils
Magnus DAM, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, GERMANYMeasurement and analysis of winding stresses in dry-wound pancake coils using pressure measurement films
Jeonghwan PARK, Seoul National University, Seoul, KOREA, REPUBLIC OFInterface Characterization at Cryogenic Temperatures for Superconducting Magnets
Jose Luis RUDEIROS FERNANDEZ, Lawrence Berkeley National Laboratory, Berkeley, USAA non-destructive method for detecting turn-to-turn resistivity distribution in NI REBCO coils
Wei WU, Shanghai Jiao Tong University; Shanghai Superconductor Technology Co., Ltd., Shanghai, CHINAStability, quench and heat localization analysis in HTS magnets at low temperatures
Vitaly VYSOTSKY, Russian Scientific R&D Cable Institute, Moscow, RUSSIAN FEDERATIONComparison between insulated and NI layer-wound ReBCO coils during transients
Andrea MUSSO, RSE S.p.A., Milan, ITALY14:30
16:30
3PoA - Poster sessions
Session chairs: Christophe BERRIAUD, Pierre BAUER
Preliminary Design of a MARS-D Superconducting Magnet Cryostat
Li WANG, Lawrence Berkeley National Laboratory, Berkeley, USAWinding trial and coil characterisation toward the design of the ASTERICS ion source sextupole
Elena FERNANDEZ MORA, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEDesign and development of a 28 GHz Nb3Sn ECR ion source magnet
Tengming SHEN, Lawrence Berkeley National Laboratory, Berkeley, USAProgress in the design of the ASTERICS 28 GHz ECR ion source superconducting magnet for the NEWGAIN project at GANIL
Damien SIMON, CEA Saclay, Gif-sur-Yvette, FRANCEFinal design of the 45 GHz MARS-D ECR Ion source cold-mass
Mariusz JUCHNO, Lawrence Berkeley National Laboratory, Berkeley, USAElectromagnetic Optimization Design of conducting cooled superconducting quadrupole magnet with active shielding
He GANG, Institute of Modern Physics,Chinese Academy of Sciences, Lanzhou City, CHINADesign and Test of a Fast-Cycled DCT Superconducting Dipole Magnet
Yu LIANG, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINADevelopment of HRFS Superconducting Multipoles Magnet For HIAF
Yu LIANG, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINABump magnets for injection section in SESRI
Jingjing ZHANG, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINADesign, Construction and Tests of the Superferric Dipoles for the High Energy Fragment Separator of the HIAF
Qinggao YAO, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINAStatus of preliminary design studies for the three superferric 30° bending magnets for the Energy Buncher of FAIR
Arnaud MADUR, CEA Saclay, Gif-sur-Yvette, FRANCEDesign and optimization of the Superferric Dipole Magnet for HIAF-HFRS
Wei YOU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINADesign of a fast ramping superconducting dipole magnet
Yuquan CHEN, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINASession chair: Pierre PUGNAT
Design and field measurement of dipole magnets for PREF
Lixia ZHAO, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINA, Lanzhou, CHINAField representation for longitudinal gradient bends and reverse bends
Pierre SCHNIZER, Helmholtz-Zentrum Berlin für Materialien und Energie, Berlin, GERMANYMagnet design status of SOLEIL II
Charles KITEGI, Synchrotron SOLEIL, Saint-Aubin, FRANCEConduction Cooling Test Results of Metal Insulated High Temperature Superconductor Wavelength Shifter
Jeonghwan PARK, Seoul National University, Seoul, KOREA, REPUBLIC OFMagnet designs for the multi-bend achromat lattice of the shenzhen innovation light-source facility
Chunguang WANG, Institute of Advanced Science Facilities, Shenzhen, CHINADesigns of multipole magnets based on NSGAII for Hefei Advanced Light Facility
Tianhao SUN, National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei, CHINAPreliminary design of a cryogen-free 6.6 T superconducting wavelength shifter
Juan GANSAUSKAS GALVEZ, CNPEM - Brazilian Center for Research in Energy and Materials, Campinas, BRAZILDesign optimization of a 6 T Fast Cycling Dipole Model with Round Cable
Tongjun YANG, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINASession chair: Tengming SHEN
Comparison of analytical and experimental results on mechanical and thermal behavior of the FAIR Super-FRS superconducting dipole coil
Hugo REYMOND, CEA Saclay, Gif-sur-Yvette, FRANCETest results for a Nb3Sn canted-cosine-theta dipole subscale magnet series
Diego ARBELAEZ, Lawrence Berkeley National Laboratory, Berkeley, USAThe superconducting quadrupole unit production and doublet module integration for SIS100.
Christian ROUX, GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, GERMANYSuperconducting magnet String Test for the SIS100 accelerator of FAIR
Christian ROUX, GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, GERMANYFabrication and test of COMB dipole magnet with STAR® wires*
Vadim KASHIKHIN, Fermi National Accelerator Laboratory, Batavia, USAAssembly and test of several typical sextupole coils using magnetic mirror structure
Li ZHU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINATest results of the superconducting solenoids series production for the SARAF-linac project.
Damien SIMON, CEA Saclay, Gif-sur-Yvette, FRANCECryogenic tests of the superconducting magnets for the NICA collider
Dmitry NIKIFOROV, Joint Institute for Nuclear Research, Dubna, RUSSIAN FEDERATIONAssembly and power tests of the long orbit nested corrector prototype for HL-LHC
óscar DURÁN LUCAS, CIEMAT (Centro de Investigaciones Energéticas MedioAmbientales y Tecnológicas), Madrid, SPAINTest and modeling results of the quench behavior of a Nb-Ti Canted-Cosine-Theta corrector magnet for LHC
Tommaso BAGNI, Uppsala University, Uppsala, SWEDENValidation of the protection scheme for the HL-LHC MBRD magnet by simulations and prototype tests
Stefania FARINON, INFN, Genoa, ITALYDesigns and Measurements of a New Superbend-Magnet for WALS
Yuan CHEN, The Institute for Advanced Studies, Wuhan University, Wuhan, CHINASession chair: Roland PICCIN
E-CLIQ quench protection for the next generation of Nb3Sn accelerator magnets
Tim MULDER, CERN, Meyrin, SWITZERLANDQuasi-3D Quench Simulation of Superconducting Magnet Coils
Laura D'ANGELO, Technische Universität Darmstadt, Darmstadt, GERMANYQuench Protection Study of Fusillo Subscale Curved CCT Magnet
Mariusz WOZNIAK, CERN, Meyrin, SWITZERLANDSimulating quench transients in the High Luminosity LHC high order corrector magnets
Emmanuele RAVAIOLI, CERN, Meyrin, SWITZERLANDA numerical simulation of quench propagation in Nb3Sn coils covered with protection heaters and optimization of the heater designs in Block-type accelerator dipoles
Shahriar BAKRANI BALANI, Tampere University, Tampere, FINLANDBi-Filar coil winding for fast quench protection
Steven KRAVE, Fermi National Accelerator Laboratory, Batavia, USAQuench heater technology for superconducting accelerator magnets
Roland PICCIN, CERN, Meyrin, SWITZERLANDDesign, simulation and test results of quench protection system for a 13-T twin-aperture superconducting dipole magnet
Jinrui SHI, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINAQuench detection system consolidation for the HL-LHC era
Jelena SPASIC, CERN, Geneva, SWITZERLANDEvaluation of the parallel-scheme varistors as energy-extraction system for a test facility of superconducting accelerator magnet
Kento SUZUKI, High Energy Accelerator Research Organization, Tsukuba, JAPANSession chairs: Luigi RECCIA, Jeremy WEISS
A trial fabrication status report on stacked hts conductors mainly for fusion magnet applications
Dohyun BAEK, PowerNix Co., Ltd., Sejong City, KOREA, REPUBLIC OFAdvantages of Cu-Nb Reinforced Nb3Sn Strands in Large Multi-stage Stranded Cables with Low-void Fraction
Masahiro SUGIMOTO, Furukawa Electric Co., Ltd., Nikko, JAPANCritical Current Density in Straight Undoped MgB2 Wires and Small Coils Undoped MgB2 with Nano-Amorphous Isotopic Boron (11B) Made by IMD Method
Daniel GAJDA, Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Wroclaw, POLANDDevelopment of internal tin Nb3Sn strand for CRAFT in WST
Yigong SHI, Northwestern Polytechnical University, Xi'an, CHINAA Study on Non-uniform Current Distributions in a Stacked HTS Conductor due to Lead Contact Resistance Variations
Sangjun OH, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFDevelopment of high temperature superconducting CORC® magnets, CICC, and low loss joints for fusion applications
Jeremy WEISS, Advanced Conductor Technologies LLC and University of Colorado Boulder, Boulder, USAAdvanced Nb3Sn conductors and their applications
Mike TOMSIC, Hyper Tech Research, Inc., Columbus, USATEM study of in-situ cryogenic ion irradiation of REBCO conductors
William LO, The Pennsylvania State University, University Park, USAThe research status of ReBCO and Bi2212 CICC for fusion reactor at ASIPP
Jinggang QIN, Institute of Plasma Physics,Chinese Academy of Sciences, Heifei, CHINASession chairs: Satoshi AWAJI, Marco BRESCHI
Metal-as-insulation REBCO insert: simplified protection scheme and investigation of cooling defect under high-field operation
Jungbin SONG, LNCMI - EMFL / CNRS / UGA, Grenoble, FRANCE‘Little Big Coil’ evaluations of the slit-edge orientation on mechanical damage of REBCO-coated conductor in small and high-stress coils
Jeseok BANG, National High Magnetic Field Laboratory, Tallahassee, USAInfluence of local quench on screening current for no-insulation HTS pancake coil
Yingmin CUI, North China Electric Power University, Baoding, CHINAA quench detection method for parallel co-wound HTS coils based on current redistribution
Changhao HU, Huazhong University of Science and Technology, Wuhan, CHINAWhat kind of Cu stabilizer layer of REBCO tape does the magnet designer really need?
Zili ZHANG, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAA magnet dynamic self-coupling discharging technique for the quench protection of high temperature superconducting multiple coil system.
Longhao YANG, Shanghai Jiao Tong University, Shanghai, CHINADesign and construction of the REBCO insert coil for a 20 T all superconducting user magnet for material testing facility
Xintao ZHANG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINASession chairs: Vitaly VYSOTSKY, Nicholas CLAYTON
Influence of impregnation methods on quench protection characteristics of high temperature superconducting coils
Takeru NAKAHARA, Sophia University, Tokyo, JAPANEffect of Epoxy Composites Containing Acid-Treated CNT Filler as an Insulator on the Thermal Properties of 7.87 T NbTi Magnet
Younghoon KIM, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFQuench and recovery characteristics of superconducting current limiting coil immersed in liquid nitrogen / tetrafluoromethane mixture under DC impact
Zhihao ZHOU, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINANumerical analysis of electromagnetic behavior and control characteristics of large scale HTS synchronous motor Using no-insulation field winding
Satoshi FUKUI, Niigata University, Niigata, JAPANThermal analysis of NI HTS field coils for a partially superconducting motor under high-speed operation
Jukyung CHA, Seoul National University, Seoul, KOREA, REPUBLIC OFEffect of contact resistivity on characteristics of multi-pole no-insulation HTS field coils in synchronous motors
Uijong BONG, Seoul National University, Seoul, KOREA, REPUBLIC OFAn inverse study of transient response of a no-insulation coil with AC currents based on simplified equivalent circuit models
Yingzhen LIU, Harbin Institute of Technology, Harbin, CHINAElectromagnetic characteristics of large scale metal insulation HTS magnet during excitation process
Tong CHE, SWIP, CHENGDU, CHINAEvaluation of effectiveness of strand transposition in multi-stacked coils wound with no-insulation bundle REBCO conductor for SMES
Tomoki OGASAWARA, Waseda University, Tokyo-to, JAPANStudy on the electromagnetic-thermal-mechanical behaviors of HTS non-insulation coils during transient processes
Li LU, Shanghai Jiao Tong University, Shanghai, CHINASession chair: Fedor GÖMÖRY
Design and Test of No-insulation Class HTS Magnet based Magnetohydrodynamics Ship
Chaemin IM, Seoul National University, Seoul, KOREA, REPUBLIC OFTime Constant of Shielding Current Induced in No-Insulation High-Temperature Superconducting Magnetic Shields
Yoh NAGASAKI, Tohoku University, Sendai, JAPANOperation control for verification of power grid operation of no-insulation class HTS magnet using 7kW converter
Chaemin IM, Seoul National University, Seoul, KOREA, REPUBLIC OFAnalysis and optimization of impregnating materials for superconducting coils
Jiajie WU, Huazhong University of Science and Technology, wuhan, CHINATesting of a Vanadium-oxide-coated Smart Insulation Motor
Hyung-Wook KIM, Korea Electrotechnology Research Institute, Changwon-si, KOREA, REPUBLIC OFEvaluation of the Fatigue Life of Solder REBCO Joints under Thermal Loadings as a Tool to Estimate the Current Lead Lifetime
Min Kyu SUN, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFInvestigation of Minimum Tolerable Bending Strain of High-Temperature Superconductor Solder Joint by Varying the Thickness of the Stabilizer and Solder
Jungmin KIM, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFInfluence of Joints on the Pre-loading Process in High-Temperature Superconducting Magnet Design
Jongsung LEE, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFSensitivity of YBCO thin film to γ-radiation
Babak TAHERI, ENEA, Superconductivity Laboratory, Department of Fusion and Technologies for Nuclear Safety and Security, FRASCATI, ITALYSession chairs: Tiina SALMI, Lorenzo GIANNINI
Numerical investigation of current distribution in composite multifilamentary/bundle HTS conductor
Hiroshi UEDA, Okayama University, Okayama, JAPANCreating precisely-shaped and fully-confined magnetic fields in magnets with no forces between wires
Alvar SANCHEZ, Universitat Autonoma Barcelona, Bellaterra, SPAINNumerical Calculation of Mutual Inductance of D-shaped Coils Applied to High-Temperature Superconducting Magnetic Energy Storage Magnets
Wenxu LIU, Beijing Jiaotong University, Beijing, CHINAImpact of the interplay between ferromagnetic slice and overlapped magnetic field on the output of an HTS dynamo.
Gang REN, State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu, CHINATowards complete workflow automation of superconducting magnet and circuit simulations with the STEAM framework
Mariusz WOZNIAK, CERN, Meyrin, SWITZERLANDMultiphysics analysis of a quadrupole magnet using SIMULIA tools on the 3DEXPERIENCE Platform
Ben PINE, Dassault Systemes, Wallingford, UNITED KINGDOMInvestigation of relationship between screening current and magnetic flux invasion in REBCO coils
Seishiro UCHIYAMA, Waseda University, Nishigahara, Kita-ku, Tokyo-to, JAPANNumerical simulation and measurement of equivalent elastic modulus of Bi2223 stacked-tape cables
Run WU, Southwestern Institute of Physics, Chengdu, CHINAParallel performance of Radia 3D magnetostatics code
Charles KITEGI, Synchrotron SOLEIL, Saint-Aubin, FRANCEFeasibility study of equivalent Young’s modulus for HTS pancake coil
Jaemin KIM, Seoul National University, Seoul, KOREA, REPUBLIC OFA COMSOL application for a user-friendly model generation for multi-physics simulation of coated conductor tape solenoids
Tiina SALMI, Tampere University, , FINLAND18:00
Session chair: Alessandro BONITO OLIVA
Lessons learned from EF1 electrical short incident during JT-60SA integrated commissioning test
Kazuya HAMADA, National Institutes for Quantum Science and Technology, Naka, JAPANMitigation plans for insulation failures and arcing in the ITER magnets
Min LIAO, ITER Organization, Saint-Paul-lez-Durance, FRANCEUsing ansys to simulate postulated arc incidents in the iter tf feeders
Sam TIPPETTS, UKAEA, Abingdon, UNITED KINGDOMEnvironmental stress cracking of polyimide insulated wires
Roland PICCIN, CERN, Meyrin, SWITZERLAND4.5K Paschen Qualification Testing of Terminal Joint and Voltage Tap Insulation Designs for ITER CS Module Test Facility
Bryce FLEDDERMAN, General Atomics, Poway, USACommissioning and Operation of ITER CS Module Test Facility: DC Power Supply and DC Breaker Systems
Edward ORTIZ, General Atomics, San Diego, USASession chairs: Matthias MENTINK, Anna KARIO
Fifteen Years of Operation of the CMS Detector Superconducting Magnet
Benoit CURE, CERN, MEYRIN, SWITZERLANDMadmax Magnet: status of the very large-scale 9 T dipole for dark matter experiment
Walid ABDEL-MAKSOUD, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEMagnesium diboride magnets for future particle detectors
Riccardo MUSENICH, INFN, , ITALYMARCO, the new solenoidal detector magnet for the ePIC experiment at BNL.
Valerio CALVELLI, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEStructural design of a Large-gap Superconducting spectrometer magnet for CEE
Jiaqi LU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINADevelopment of Aluminum stabilized Stacked ReBCO Tape Conductor for CEPC
Feipeng NING, IHEP, Beijing, CHINASession chairs: Mark BIRD, Dongkeun PARK
Current status of the facility for high field cable testing at Fermilab
George VELEV, Fermi National Accelerator Laboratory, Batavia, USAUpgrade of the Ma.Ri.S.A. test facility in INFN Genova
Andrea BERSANI, INFN, Genova, ITALYReview on progresses of the homemade 15T LTS solenoidal background magnets using for material testing facility：Magnet Design, Manufacture and Testing
Gao PENG, Institute of Plasma Physics,Chinese Academy of Sciences, Heifei, CHINAOperation of a 20 stacked pancakes REBCO coil based on the two-tape bundle architecture in conduction cooling conditions
Alexandre ZAMPA, Tohoku University, Sendai, JAPANPerformance of epoxy-impregnated high temperature superconducting (hts) coils inside a 16 tesla large bore, low temperature superconducting (lts) magnet
Darko BRACANOVIC, Cryogenic Ltd, London, UNITED KINGDOMDevelopment progress on compact high-field all-HTS no-insulation superconducting magnet
Chukun GAO, Laboratory for Physical Chemistry, ETH Zürich, Zürich, SWITZERLANDPerformance evaluations of HTS mock-up magnets wound with various REBCO tapes under high magnetic field at 4.2 K
Jungbin SONG, LNCMI - EMFL / CNRS / UGA, Grenoble, FRANCEImpregnation damage monitoring for the Nb3Sn Canted-Cosine-Theta magnets using time-domain reflectometry
Geon Seok LEE, Lawrence Berkeley National Laboratory, Berkeley, USASession chairs: Alfredo PORTONE, Alexandre TORRE
Performance of the ReBCO ASTRA conductor prototype for DEMO CS
Nikolay BYKOVSKIY, EPFL-SPC, Villigen PSI, SWITZERLANDDesign and performance evaluation of two kinds of full-size YBCO CICC specimen for fusion
Jin HUAN, Institute of Plasma Physics, Chinese academy of Sciences, Hefei, CHINADesign and performance verification of the cable-in-conduit conductor for CFETR TF prototype coil
Chao DAI, Institute of Plasma Physics, Chinese Academy of Sciences, HEFEI, CHINAMechanical analysis and testing results on high strength CICC jacket with YS>1500MPa@4.2K used for future fusion reactor
Weijun WANG, Institute of Plasma Physics Chinese Academy of Sciences, Hefei, CHINARoebel tapes for ultra-compact HTS tokamaks
Tim COOMBS, Cambridge University, cambridge, UNITED KINGDOMProgress of HTS Conductor for Compact Fusion Reactor at SWIP
Pengyuan LI, Southwestern Institute of Physics, Chengdu, CHINABending tolerance of react&wind Nb3Sn conductors for fusion magnets
Pierluigi BRUZZONE, EPFL-SPC, Villigen PSI, SWITZERLAND22:00
Fun Walk!
Explore the highlights of Aix-en-Provence in a fun way.
Start: 18.30
Meeting Point:
Office de Tourisme
300 Av. Giuseppe Verdi
This entertaining treasure hunt will guide you to the dinner venue “La Mado” where we will have an informal dinner starting at 20.00.
Address:
La Mado
4 Place des Prêcheurs
If you should get lost or need to contact us:
Sabina Griffith / Sabina.griffith@iter.org, +33 627 96 14 82
Cecile Foucher de Brandois / Cecile.FoucherdeBrandois@iter.org, +33 6 28 10 87 28
Sept. 14th, 2023
08:15
09:45
Exclusively sponsored by Quanscient
Session chairs: Michael PARIZH, Thierry SCHILD
Exploring the Human Brain with Ultra-high Field MRI: Perspectives from the Iseult Project
Denis LE BIHAN, NeuroSpin, CEA Saclay, Paris, FRANCETo be announced
Rebecca RAMB, Siemens Healthineers, Erlangen, GERMANY11:30
4PoM - Poster sessions
Session chairs: Matthias MENTINK, Benoit CURE
High-field magnets for axion dark matter detection
Clément GENOT, CEA SACLAY, Gif-sur-Yvette, FRANCEDesign and test a 1/6 prototype of the superconducting dipole magnet for the CEE detector
Wei YOU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINADesign and Prototyping of a Novel Toroid Magnet System for the MOLLER Experiment at Jefferson Lab
David KASHY, Thomas Jefferson National Accelerator Facility, Newport News, USAInternal cryogenics of the MARCO superconducting solenoid for the EPIC experiment at BNL
Jean-Pierre LOTTIN, CEA Paris-Saclay, Gif-sur-Yvette cedex, FRANCEMADMAX cryogenic stability: preliminary design of the MACUMBA demo-coil for physics
Clément LORIN, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEPre-manufacturing design and manufactured items of the superconducting dipole magnet for the CBM detector
Aleksei BRAGIN, Budker Institute of Nuclear Physics, Novosibirsk, RUSSIAN FEDERATIONRutherford-In-Copper-Channel conductor for the MARCO solenoidal detector magnet
Francesco STACCHI, CEA Paris-Saclay, Gif-sur-Yvette, FRANCESession chairs: Carla MARTINS JARDIM, Veronica ILARDI
Classifying the electromagnetic behavior of LHC main dipole magnets
Emmanuele RAVAIOLI, CERN, Meyrin, SWITZERLANDAUP first Pre-series Cold Mass installation into the Cryostat
Sandor FEHER, Fermi National Accelerator Laboratory, Batavia, USAAnalysis of the MQXFA low beta quadrupoles for HL-LHC after 65% magnet assembly complete
Giorgio AMBROSIO, Fermi National Accelerator Laboratory, Batavia, USAStatus and Challenges in the Nb3Sn MQXFB Quadrupoles for HL-LHC
Nicholas LUSA, CERN, Meyrin, SWITZERLANDAUP first pre-series cryo-assembly design production and test overview
Sandor FEHER, Fermi National Accelerator Laboratory, Batavia, USAFirst CERN cold masses for the HL-LHC interaction regions
Herve PRIN, CERN, Meyrin, SWITZERLANDFirst long orbit nested corrector MCBXF magnet for HL-LHC produced in the industry
Carla MARTINS JARDIM, CIEMAT (Centro de Investigaciones Energéticas MedioAmbientales y Tecnológicas), Madrid, SPAINFermilab’s horizontal test stand upgrade overview and commissioning
Guram CHLACHIDZE, Fermi National Accelerator Laboratory, Batavia, USAHL-LHC IT string: status and perspectives
Marta BAJKO, CERN, Geneva, SWITZERLANDExperimental Program of the HL-LHC Inner Triplet String Test at CERN
Samer YAMMINE, CERN, Geneva, SWITZERLANDStudy on the thermal contraction behavior of state-of-the-art MQXF superconducting magnet coils in the azimuthal, radial, and axial direction
óscar SACRISTÁN DE FRUTOS, CERN, Geneva, SWITZERLANDSession chair: Pierre BAUER
Strain measurement method based on new compensation bridge with double two-wire configuration for superconducting magnet detector
Ming Zhi GUAN, Institute of Modern Physics, Chinese Academy of Science, Lanzhou, CHINAAnalysis of the strain gauge data from the coils of the MQXFA magnets during the vertical test in liquid helium
Laura GARCIA FAJARDO, Lawrence Berkeley National Laboratory, Berkeley, USAStrain monitoring of superconducting magnets in real-time at low temperatures using distributed optical fiber strain sensing technology
Xingzhe WANG, Key Lab of Mechanics on Western Disaster and Environment, College of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, CHINAValidating the physics-driven lumped-element model of the LHC magnet dipole magnet
Marvin JANITSCHKE, CERN, Meyrin, SWITZERLANDElectrical simulations of the SIS100 superconducting dipole and quadrupole circuits: transients, earthing and failure modes
Piotr SZWANGRUBER, GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, GERMANYStudy on the overshooting current and shimming-coil optimizing methods for the mitigation of the Screening Current-Induced Magnetic Field effect in a model dipole coil based on coated conductors
Ze FENG, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINANew measurement techniques used for the Electrical Quality Assurance of HL-LHC superconducting magnets
Jaromir LUDWIN, Institute of Nuclear Physics Polish Academy of Sciences, Kraków, POLANDOptimizing Secondary-CLIQ for protecting high-field accelerator magnets
Emmanuele RAVAIOLI, CERN, Meyrin, SWITZERLANDEffect of CLIQ on training of HL-LHC quadrupole magnets
Stoyan STOYNEV, Fermi National Accelerator Laboratory, Batavia, USAAcoustic emission reveals persistent locations of elastic energy release during training of Nb3Sn canted-cosine-theta dipoles
Maxim MARCHEVSKY, Lawrence Berkeley National Laboratory, Berkeley, USATest of distributed fiber optic sensing in a subscale dipole magnet using CORC® wires
Linqing LUO, Lawrence Berkeley National Laboratory, Berkeley, USAEnabling real-time impedance measurements of operational superconducting circuits of accelerator magnets
Magnus Bøgh Borregaard CHRISTENSEN, CERN, Geneva, SWITZERLANDDesign considerations of a magnet-based diagnostic system with compact layout for typical beam injector
Xu LIU, Huazhong University of Science and Technology, Wuhan, CHINADesign of control system for electron-beam diagnostic equipment based on electrical magnets
Tongning HU, Huazhong University of Science and Technology, Wuhan, CHINASession chair: Stephan RUSSENSCHUCK
Pulsed wire magnetic-field measurement system on permanent quadrupole magnet
Chin-Kang YANG, National Synchrotron Radiation Research Center, Hsinchu, TAIWANAlignment of a solenoid system by means of a translating-coil magnetometer
Mariano PENTELLA, CERN, Meyrin, SWITZERLANDA translating-coil magnetometer for the magnetic measurement of the HL-LHC higher-order corrector magnets at room temperature
Mariano PENTELLA, CERN, Meyrin, SWITZERLANDA rotating-coil mapper for field quality measurements in static and dynamic operation conditions
Stephan RUSSENSCHUCK, CERN, Meyrin, SWITZERLANDPCB-based rotating coils for measuring sextupole magnets
Joseph DIMARCO, Fermi National Accelerator Laboratory, Batavia, USAThe Online Undulator Magnetic Field Measurement System
Cheng YU, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, CHINAEncoder-less acquisition system for rotating-coil measurements
Piotr ROGACKI, CERN, Meyrin, SWITZERLANDA Flexible Field Mapping System for Accelerator Magnets
Jerzy NOGIEC, Fermi National Accelerator Laboratory, Batavia, USASession chairs: Ian PONG, Thitipong SATIRAMATEKUL
Bi2212 standard wire design and low cost volume fabrication development
Alexander OTTO, Solid Material Solutions, LLC, North Chelmsford, USAEffect of Hf Addition to Nb-alloy Core on Nb3Sn Grain Morphology under the High Sn Diffusion Driving Force
Koki ASAI, Sophia University, Narashino, JAPANInternal strain measurement by neutron diffraction under transverse compressive stress for Nb3Sn wires with and without Cu-Nb reinforcement
Mio NAKAMOTO, National Institues for Quantum Science and Technology, Naka, JAPANA new numerical approach to study critical current degradation in Nb3Sn wires due to pre-HT transverse strain deformations
Sergio BURIOLI, INFN, Genova, ITALYNumerical study of electromagnetic behavior of an elliptical superconducting filament
Thitipong SATIRAMATEKUL, Kasetsart University, Nakhon Pathom, THAILANDThe effect of Xe-ion irradiation on the pinning properties of 2G HTS wire
Pavel DEGTYARENKO, S-Innovations LLC, Moscow, RUSSIAN FEDERATIONSession chairs: Nicolai MARTOVETSKY, Nicholas CLAYTON
W7-X magnet system thermal insulation analysis under fast plasma decay conditions
Mikhail KHOKHLOV, Max Planck Institute for Plasma Physics, Greifswald, GERMANYResearch On Insulation Process Reliability And Stability Of Superconducting Twin-box Joint
Nengtao ZHOU, Institute of plasma physics, Chinese Academy of Sciences (ASIPP), Hefei, CHINADesign of non-insulated TF coils for the EU DEMO reactor
Mattia ORTINO, EPFL-SPC, Villigen, SWITZERLANDEffects of resonance phenomenon and transient response on voltage between conductor in JT-60SA PF coils
Tomoka KOBAYASHI, Sophia University, Tokyo, JAPANResearch on insulation technology for Super-X Test Facility
Yuanyuan MA, Institute of plasma physics, Chinese Academy of Sciences, Hefei, CHINAA Protection Method for Large HTS Coil by Copper Plate in Conduction Cooling System
Xueliang WANG, Shanghai Jiao Tong University, Shanghai, CHINAParallel-wound No-insulation High Temperature Superconducting Magnet for Large-scale High Field Fusion Applications
Yutong FU, Shanghai Jiao Tong University, Shanghai, CHINAApplication of high voltage insulation on the magnet feeder superconducting joints during ITER machine assembly
Nicholas CLAYTON, ITER Organization, Saint-Paul-lez-Durance, FRANCEDevelopments of the ITER magnet protection system in case of High Voltage insulation failure
Christine HOA, ITER Organization, Saint-Paul-lez-Durance, FRANCECoil structures and key challenges for the HTS magnets of the ST80-HTS spherical tokamak.
Rod BATEMAN, Tokamak Energy, Abingdon, UNITED KINGDOMSession chair: Stefano SGOBBA
A Pre-Conceptual Study of Compact Tokamak Solenoid Insert with an Ultra-Compact No-Insulation REBCO Magnet
Yi LI, Princeton Plasma Physics Laboratory, Princeton, New Jersey, USAIter magnets superconducting joints prototype tests in the cea selfie facility for operators qualification
Clément NGUYEN THANH DAO, CEA, Saint-Paul-lez-Durance, FRANCECentral control system for CFETR CS model coil testing platform
Tong LI, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, CHINAExperimental study on the DC performance of a Nb3Al Cable-in-conduit Conductor
Ma HONGJUN, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAAnalysis of the leakage events of the ITER actively cooled magnet system thermal shields pipes
Stefano SGOBBA, CERN, Genève, SWITZERLANDSession chairs: Doan NGUYEN, Sergei ZHERLITSYN
NON-DESTRUCTIVE HIGH-FIELD PULSED SOLENOIDS FOR ELECTRONICS AND PLASMA PHYSICS
Mikhail GLYAVIN, IAP RAS, Nizhny Novgorod, RUSSIAN FEDERATIONQUASI-FORCE-FREE MAGNETS OF SMALL VOLUME FOR GENERATORS OF SHORT-WAVE MICROWAVE RADIATION
Mikhail GLYAVIN, IAP RAS, Nizhny Novgorod, RUSSIAN FEDERATIONDesign of A 20 T Pulsed Magnet for the pulsed field magnetometer
Jinqiao CHEN, Huazhong University of Science and Technology, Wuhan, CHINAOptimization algorithm of high stable flat-top pulsed magnetic field system
Shuang WANG, Huazhong University of Science and Technology, Wuhan, CHINADesign and test of a 30T-100ms flat-top magnet with a conical bore at the WHMFC
Huidong SHANG, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINAAnalysis of the influence of assembly deviation on a duplex magnet and design of a new multiplex magnet for 80T
Shaobo LIU, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINADesign of a high-homogeneity 55 T pulsed magnet for high-resolution nuclear magnetic resonance measurement
Wenqi WEI, Huazhong University of Science and Technology, Wuhan, CHINAExperimental and Simulation Study on Fast Cooling Method of Pulsed Magnetic Coil Based on Heat Pipe
Yiliang LV, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINASession chair: Christophe BERRIAUD
A Novel Magnetic Integrate L-C Filter for Multi-Phase Interleaved Buck Converter to Generate High Stability Magnet Field
Tao JIANG, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINAResearch on a novel combined power supply system for a high pulsed flat-top two-coil magnet
Yun XU, Huazhong University of Science and Technology, Wuhan, CHINAUpgrading of the control system for the pulsed high magnetic field facility at WHMFC
Jianfeng XIE, Huazhong University of Science and Technology, Wuhan, CHINAA high current Marx generator with energy recovery for the repetitive frequency pulsed magnetic field
Shaozhe ZHANG, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINADevelopment of a pulsed power supply for laboratory astrophysics experiments under high magnetic fields
Jérôme BEARD, CNRS, TOULOUSE, FRANCEDesign of a new 14-MW Highly Stabilized Power Supply at the CHMFL
Can WANG, High Magnetic Field Laboratory, Chinese Academy of Sciences, Hefei, CHINASession chair: Shohei NOJIMA
Fabrication and test of Nb3Sn-NbTi superconducting joint for a 14-T MRI magnet
Zhidong SHEN, Department of Electrical Engineering, Tsinghua University, Beijing, CHINAFabrication and experiments on a 1/2-scale demonstration NI-REBCO coil system of skeleton cyclotron for cancer therapy
Rui KUMAGAI, Waseda University, Tokyo, JAPANGenetic-Algorithm-based Room-Temperature Shimming and Long-term Operational Protocol for 400 MHz all-HTS NMR magnet
Jae Young JANG, Korea University of Technology and Education, Cheonan, KOREA, REPUBLIC OFFerromagnetic shimming of an all-ReBCO NMR magnet employing topology optimization
Minchul AHN, Kunsan National University, Gunsan, KOREA, REPUBLIC OFSensitivity analysis and optimization of ferromagnetic shim design of NMR magnets using ANOVA
Minchul AHN, Kunsan National University, Gunsan, KOREA, REPUBLIC OFMonte Carlo probabilistic sensitivity analysis for ferromagnetic shim design of NMR/MRI magnets considering manufacturing errors
Minchul AHN, Kunsan National University, Gunsan, KOREA, REPUBLIC OFScreening Currents Induced Magnetic Field Reduction for HTS Pre-polarization Coil in Ultralow-Field MRI
Pai PENG, Shanghai Jiao Tong University, Shanghai, CHINASession chair: Michinaka SUGANO
Effects of muli-step high temperature heating treatments in multifilamentary Nb3Sn strands
Pengju LI, Western Superconducting Technologies Co., Ltd., Xi'an, CHINAPersistent Current Switch with a Superconducting Joint for a 7.87 T NbTi Magnet
Hyun Sung NOH, Department of Materials Science and Engineering, Korea University, Seoul, KOREA, REPUBLIC OFMagnetic field angle dependence of longitudinal magnetic field effect in NbTi superconducting wire
Shoichi YOKOYAMA, Japan Superconductor Technology,Inc., Kobe,HYOGO, JAPANInvestigation on the recrystallization and Nb3Sn formation for various Nb alloys with large deformation during heat treatment
Bo WU, Western Superconducting Technologies Co., Ltd., Xi'an, CHINAAnalysis of strain effect in High-Jc Nb3Sn superconducting wire
Young-Kyoung KIM, Kiswire Advanced Tech. Ltd., Daejeon, KOREA, REPUBLIC OFDesign of Lap Joint for a 16 T Superconductor Test Facility
Myounghun KIM, Korea Institute of Energy Technology, Naju, KOREA, REPUBLIC OF13:00
Session chairs: Alexander VOSTNER, Chao ZHOU
High current Density Cables for Simpler HTS Magnets in Fusion Energy Systems
Yuhu ZHAI, Princeton Plasma Physics Laboratory, Princeton, New Jersey, USARecovery options for TF coil of ITER with the excess heat load
Junjun LI, ITER, Saint-Paul-lez-Durance, FRANCEQualification test of prototype samples of the REBCO SECAS fusion conductor
Luigi MUZZI, ENEA, Frascati, ITALYFinite Element modeling of full-size ReBCO CORC-like CICCs for fusion
Arend NIJHUIS, University of Twente, Enschede, THE NETHERLANDSImpact of conductor aspect ratio on AC losses: measurements and modelling using effective input parameters in the COLISEUM model
Romain BABOUCHE, CEA, Saint-Paul-lez-Durance, FRANCELatest developments of OLYMPE platform for optimizing design of fusion cryomagnetic systems
Benoit LACROIX, CEA, Saint-Paul-lez-Durance, FRANCEThermohydraulical analysis and fast assessment of operating windows for JT-60SA TFC commissioning
Sylvie NICOLLET, CEA, IRFM, 13108 Saint-Paul-les-Durance, France, Saint-Paul-lez-Durance, FRANCESession chairs: Lucio ROSSI, Stephane SANFILIPPO
A CAD engine for the design of curved accelerator magnets based on the differential geometry of the frenet frame
Melvin LIEBSCH, CERN, Meyrin, SWITZERLANDModelling training in Nb3Sn superconducting magnets
Giorgio VALLONE, Lawrence Berkeley National Laboratory, Berkeley, USAMagnet designs for High-Intensity Muon Beams (HIMB) at PSI’s Accelerator Complex HIPA
Rebecca RICCIOLI, Postdoc researcher, Paul Scherrer Institut, Villigen PSI, SWITZERLANDUni-Layer Magnets: a Novel Idea for Superconducting Magnets and the Path Towards a First HTS Demonstrator.
Jose Luis RUDEIROS FERNANDEZ, Lawrence Berkeley National Laboratory, Berkeley, USADesign and plan of a 10 T HTS dipole for the Italian facility IRIS
Lucio ROSSI, University of Milan and INFN-Milan, Segrate, ITALYDesign, construction, and test of a novel direct wind, medium field superconducting dipole based on the optimum integral design
Ramesh GUPTA, Brookhaven National Laboratory, Upton, USAAnalysis of Bi-2212 Superconducting Filament Joining using Deep Learning Methods
Reed OBERG, University of Wisconsin - Eau Claire, Eau Claire, USAMagnets for the Upgrade of the Synchrotron Swiss Light Source at the Paul Scherrer Institute - design and production aspects, measurement strategy and challenges
Stephane SANFILIPPO, Paul Scherrer Institut, Villigen, SWITZERLANDSession chair: Marco BRESCHI
HTS quench detection using Rayleigh-backscattering Interrogated Optical Fibers in a mechanically noisy environment
William LO, The Pennsylvania State University, University Park, USAIrradiation Sensitivity Investigation of Rayleigh Interrogated Optical Fiber (RIOF) Sensors for Superconducting Magnets
William LO, The Pennsylvania State University, University Park, USATemperature monitoring in superconducting magnetic bearings using fiber Bragg grating sensors.
Mohammad SIAMAKI, Paihau-Robinson Research Institute, Victoria University of Wellington, Lower Hutt, NEW ZEALANDStrain and temperature sensitivities experiments of distributed fiber Bragg grating sensors with different coatings in a large temperature range
Peng Nian ZHANG, LANZHOU university, LANZHOU, CHINAFiber Optic Thermometry for Quench Detection in High-Temperature Superconducting Cables for Fusion Devices
Michele CAPONERO, ENEA, Frascati, ITALYFiber-Optics Quench Detection Schemes in HTS Cables for Fusion Magnets
Gianluca DE MARZI, ENEA, Frascati, ITALYCoherent-Phase Optical Time Domain Reflectometry for Monitoring High Temperature Superconducting Magnet Systems
William LO, The Pennsylvania State University, University Park, USAQuench Detection and Temperature Measurement with Optical Fibers
Hugues BAJAS, EPFL-SPC, Villigen PSI, SWITZERLANDMeasuring the quench dynamics and distributed optical fiber quench detection feasibility of the Taipan PIT-VIPER coil
Charlie SANABRIA, Commonwealth Fusion Systems, Devens, USA13:00
Session chairs: Alexandre TORRE, Min LIAO
Introduction
Alexandre TORRE, CEA, Saint-Paul-lez-Durance, FRANCEWinding and test results of a hard-way bend free ReBCO cloverleaf type of accelerator coil demonstrator
Thomas NES, University of Twente, Enschede, THE NETHERLANDSTowards rod-type internal-Sn Nb3Sn wires matching the layer Jc target of FCC by internal oxidation
Francesco LONARDO, University of Geneva, Geneva, SWITZERLANDAnalysis of Bi-2212 Superconducting Filament Joining using Deep Learning Methods
Reed OBERG, University of Wisconsin - Eau Claire, Eau Claire, USAExperimental Research on the Critical Current Characteristics of HTS Cable-In-Conduit Conductor Under the Cyclic Transverse Load
Xiaoqiang LAI, Southwestern Institute of Physics, Chengdu, CHINACORC® cables: numerical characterization of the critical current after bending process
Sofia VIARENGO, Politecnico di Torino, Torino, ITALYHeat transfer degradation in liquid helium pool boiling due to magneto-gravitational forces : influence on very high field magnet cooling
Simon BAGNIS, CEA Saclay, Gif-sur-Yvette, FRANCEShaping magnetic fields with bulk superconductors and applications to magnet technology
Natanael BORT-SOLDEVILA, Universitat Autonoma Barcelona, Bellaterra, SPAINDesign of superconducting magnetic energy storage (SMES) for waterborne applications
Carlos HERNANDO, CYCLOMED TECHNOLOGIES S.L., Madrid, SPAINAn experimental study on performance of HTS pancake coil under hoop strain using mechanical apparatus
Wonseok JANG, Seoul National University, Seoul, KOREA, REPUBLIC OFParallel performance of Radia 3D magnetostatics code
Charles KITEGI, Synchrotron SOLEIL, Saint-Aubin, FRANCE14:30
16:30
4PoA - Poster sessions
Session chair: Stephane SANFILIPPO
Design and Manufacturing of S-PRESSO, a Superconducting Undulator Prototype for the European XFEL
Achim HOBL, Bilfinger Noell GmbH, Wuerzburg, GERMANYMagnetic Design of High-Field, Short-Period Synchrotron Undulatorsby Wide, Patterned, High-Temperature Superconductors
Lorenzo BORTOT, Renaissance Fusion, Grenoble, FRANCEDevelopment of the Motion Control for a Short Elliptically Polarized Undulator at Taiwan Photon Source
Chunyi WU, National Synchrotron Radiation Research Center (NSRRC), Hsinchu, TAIWANFabrication and cryogenic test of a 1.5-m-long planar superconducting undulator at IHEP
Junhao WEI, Institute of High Energy Physics, Chinese Academy of Sciences, Dongguan, CHINAAn Electromagnetic THz Wiggler at SXFEL
Ya ZHU, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, CHINAElectromagnetic design of a 12 mm-period bulk high-temperature superconducting undulator
Dabin WEI, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, CHINAThe design of a double-period undulator based on magnetic force compensation technology
Shudong ZHOU, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, CHINAControl System for a Tapper Cryogenic Permanent Magnet Undulator at Taiwan Photon Source
Chunyi WU, National Synchrotron Radiation Research Center (NSRRC), Hsinchu, TAIWANStatus of various types of undulators at SXFEL
Cheng YU, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, CHINADevelopment of superconducting wiggler based on force-heat-electromagnetic multifield analysis
Wei LIU, Western Superconducting Technologies Co.,Ltd, Xi'an, CHINAModelling of winding and machining tolerances in a helical superconducting undulator
Alex HINTON, STFC Daresbury Laboratory, Warrington, UNITED KINGDOMSession chairs: Fabrice SIMON, Lionel QUETTIER
Model sensitivity analysis and comparison with the magnetic measurements results of the High order correctors for HL-LHC
Ernesto DE MATTEIS, INFN, Milano, ITALYAccurate calculation of integrated multipoles in FEM magnetostatic simulations
Vasily MARUSOV, GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, GERMANYMagnetic Field Simulation of a Planar Superconducting Undulator for the FEL Demonstrator
Yuko SHIROYANAGI, Argonne National Laboratory, Lemont, USAComparative analysis of resistive dipole accelerator magnets for a Muon Collider
Marco BRESCHI, University of Bologna, Bologna, ITALYStudy on leakage field shielding for the septum magnet of particle accelerator
Yanqun WEI, Institude of Modern Physics, Chinese Academy of Sciences, LanZhou, CHINANumerical analysis of screening current induced field in an iron-less cyclotron based on the T-A formulation
Wei FU, China Institute of Atomic Energy, Beijing, CHINASimulation and Measurement of Harmonic Injection and Dynamic Inductance of CSNS/RCS Magnets
Changdong DENG, Institute of High Energy Physics, Chinese Academy of Sciences, Dongguan, CHINAEfficient Magnetic Field Simulation of Superconducting Magnets using a Reduced Vector Potential Formulation
Laura D'ANGELO, Technische Universität Darmstadt, Darmstadt, GERMANYDemonstration of periodic field generation with hybrid bulk superconducting staggered array
Kii TOSHITERU, Kyoto University, Uji, JAPANDesign of the high homogeneity irregular shaped magnet in the Magnetic Recoil Spectrometer system
Pengcheng HUANG, High Magnetic Field Laboratory, Chinese Academy of Sciences., Hefei, Anhui, CHINASession chairs: Matthew JEWELL, Chao ZHOU
Status of conductor design and R&D for the MADMAX dipole
Francesco STACCHI, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEStudy of the CICC copper jacket junctions for MADMAX
Christophe BERRIAUD, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEElectro-thermo-hydraulic simulation of the CICC-wound, superfluid helium-cooled MACQU solenoid
Guillaume DILASSER, CEA Paris-Saclay, Gif-sur-Yvette, FRANCECoCaSCOPE-Mesh Generator: a tool for the generation of 3D numerical model of Rutherford Cable
François NUNIO, CEA Paris-Saclay, Gif-sur-Yvette, FRANCEWire Quality Inspection And Rutherford Cable Fabrication
Ian PONG, Lawrence Berkeley National Laboratory, Berkeley, USAStudy of the interface adhesions between Nb3Sn Rutherford cables, impregnation system and coil components in conditions representative of high-field magnets
Guillaume CAMPAGNA, CEA Paris Saclay, Gif-sur-Yvette, FRANCE3D mechanical and thermomechanical simulations of Nb3Sn Rutherford cables during coil fabrication and magnet operation
Gilles LENOIR, CEA Paris-Saclay, Gif-Sur-Yvette, FRANCER&D of Rutherford cables and Al-stabilized conductors for superconducting magnets
Yu ZHAO, Wuxi Toly Electric Works Co.,Ltd, Wuxi, CHINABending effect of the super fine strands Nb3Al cable on the superconducting performance
Norihito OHUCHI, High Energy Accelerator Research Organization, Tsukuba, JAPANUniaxial tensile stress tolerance of ultra-thin Nb3Sn composite wires and cables
Michinaka SUGANO, High Energy Accelerator Research Organization (KEK), Tsukuba, JAPANCritical current of prototype REBCO round cables at 77 K
Xudong WANG, High Energy Accelerator Research Organization, Tsukuba, JAPANNumerical simulation of the mechanical behavior of a transposed cable with the in-plane bending of REBCO tapes
Yaqiang WANG, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINABending characteristics of a transposed cable with in-plane bending of REBCO tapes (X-cable)
Juan WANG, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINADevelopment of the Aluminum stabilized superconductor for CEPC
Ling ZHAO, Institute of High Energy Physics, CAS, Beijing, CHINADesign and Demonstration of Al-Stabilized MgB2 Conductor for Higher-Sensitivity Particle Detection Magnet.
Tsuyoshi YAGAI, Sophia University, Tokyo, JAPANSession chair: Xabier SARASOLA
Results of HTS Current Lead Series Manufacturing for ITER
Pierre BAUER, ITER Organization, Saint-Paul-lez-Durance, FRANCEAnalysis of electromechanical properties of each layer of superconducting tape of multi-layer CORC cable under transverse compression load
Yangyang SHI, School of Electrical Engineering, Beijing Jiaotong Universisty, Beijing, CHINAEvaluating Conductor Design and Performance for the TF Coil Conductor in CFETR: A Preliminary Study
Muhammad Talib HUSSAIN, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031, People’s Republic of China; University of Science and Technology of China, Hefei, 230026, People’s Republic of China, HEFEI, CHINAMechanical analysis of CORC CICC for fusion tokamak magnet
Yongsheng WU, The Institute of Plasma Physics Chinese Academy of Sciences, HeFei, CHINAJoint resistance evaluation of demountable edge joint depending on magnetic field orientation for remountable high-temperature superconducting magnet
Kazuya SUZUKI, Tohoku Univ, Sendai, JAPANMechanical tests results of high current prototypes of ReBCO cables with different designs
Dmitry DIEV, NRC "Kurchatov Institute", Moscow, RUSSIAN FEDERATIONFeasibility study of HTS current leads with MgB2 shunt for Tokamak application
Nitin BAIRAGI, Institute for Plasma Research, Bhat, Gandhinagar-382 428 Gujarat, India & Homi Bhaba National Institute, Anushakti Nagar, Mumbai-400 085, Maharashtra, India, Gandhinagar, INDIACharacterization of JA DEMO candidate reinforced Nb3Sn wires under contact stress
Nobuya BANNO, National Institute for Materials Science, Adachi, JAPANCharacterization of Nb3Sn, NbTi and Cu wires for the magnet system of the DTT fusion tokamak
Rosa FREDA, ENEA, Frascati, ITALYAC Loss Calculation of Fusion Magnets Made of Roebel Tapes
Luning HAO, University of Cambridge, Cambridge, UNITED KINGDOMSession chairs: Federica DEMATTE, Alexandre TORRE
Mechanical and thermal-hydraulic analysis on the high current R&W TF winding pack for the EU DEMO
Federica DEMATTE, EPFL-SPC, Villigen PSI, SWITZERLANDAnalysis of AC losses in KSTAR superconducting PF magnets at low current ramp rates
Kim MU-YONG, KOREA INSTITUTE OF FUSION ENERGY, Daejeon, KOREA, REPUBLIC OFStudy of hysteretic losses in partial penetration oscillations through experiment and new numerical tool
Alexandre TORRE, CEA, Saint-Paul-lez-Durance, FRANCEDevelopment of Thermo-hydraulic Models of JT-60SA TF02 Coil and Feeder for First Operation Predictions Using the CryoSoft Suite
José LORENZO, Fusion for Energy, Barcelona, SPAINValidation of hysteresis loss models for HTS stacks and conductors
Andrea ZAPPATORE, Politecnico di Torino, Dipartimento energia, Torino, ITALYTest and analysis of AC losses in CORC cable
Qiangwang HAO, Institute of Plasma Physics,Chinese Academy of Sciences, Hefei, CHINAHeat transfer coefficient measurement in single chanel cable-in-conduit conductor
Quentin GORIT, CEA, Saint-Paul-lez-Durance, FRANCEExperimental Analysis of Thermal Runaway Temperature Using Simply Stacked HTS Tape for HTS CICCs of Toroidal Field Coils
Seokho NAM, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFQuantification of critical current prediction uncertainty in fusion cables introduced by variations in high temperature superconductor datasets
Jl CHENG, Commonwealth Fusion Systems, Devens, USAHigh performance Nb3Sn superconducting cable for future fusion devices
Xiaguang SUN, Southwestern Institute of Physics, Chengdu, CHINASession chairs: Paolo ROSSI, François BONNE
The experimental study on temperature variation of the superconducting magnets according to the thermal shield flow
Dong-Seong PARK, Korea Institute of Fusion Energy (KFE), Daejeon, KOREA, REPUBLIC OFDevelopment and Test of Magnetic Compression Coil System for HFRC
Qinglong ZHANG, Wuhan National High Magnetic Field Center, State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, CHINAMechanical tests on reduced scale mock-ups of ITER Pre-Compression Rings
Paolo ROSSI, ENEA, Frascati, ITALYMethod to reduce the influence of superconducting cable on feeder busbar partial discharge test
Linlin FANG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAKSTAR grounding system and operation result of ground current detection system
Young Min PARK, Korea Institute of fusion energy, Daejeon, KOREA, REPUBLIC OFSimulation of the JT60SA Supercritical Helium Toroidal Field Coil Loop During Fast Discharge Using Simcryogenics. Comparison With Experimental Data and Extrapolation to Higher Currents
François BONNE, Univ. Grenoble Alpes, CEA, IRIG, DSBT, Grenoble, FRANCEA rapid and advanced examination methodology for round-in-square jacket based on PAUT from inner circular bore
Liu XIAOCHUAN, Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, CHINAStructural Qualification of ITER Central Solenoid Module During Transport from California, USA to ITER site
Aravind SHANMUGASUNDARAM, US ITER, Oak Ridge National Laboratory, Knoxville, USASession chairs: Yuhu ZHAI, Sam TIPPETTS
Analysis of the fast safety discharge of the JT-60SA TF coils performed during the commissioning phase by means of the TACTICS code
Quentin LE COZ, CEA, Saint-Paul-lez-Durance, FRANCEDesign toolset for PF coilsets on STEP
Richard GOWLAND, UKAEA, Abingdon, UNITED KINGDOMAn optimisation approach for novel magnet topologies as applied to a levitated dipole
Tom SIMPSON, Open Star Technologies, Wellington, NEW ZEALANDSession chair: Frederic TRILLAUD PIGHI
The influence of permanent magnet surface defects on the maximum high temperature superconducting magnetic levitation force
Zhao XIAN-FENG, Lanzhou Jiaotong University, Lanzhou, CHINAMagnetizing characteristics of double quench flux-coupling type SFCL using dual iron cores due to its winding direction
Sung-Hun LIM, Soongsil University, Seoul, KOREA, REPUBLIC OFElectromagnetic Performance Optimization of a Superconducting Linear Motor with an Improved Armature Winding Structure
Kang LIU, Southwest Jiaotong University, Chengdu, CHINAStudy on the performance of electric motor and soft magnetic material under extremely low temperature
Anqi WANG, Shenyang University of Technology, Shenyang, CHINAModeling and Analysis of Superconducting Motor Hybrid Damping and Shielding System
Hao-Yuan CHEN, Nanjing University of Posts and Telecommunications, Nanjing, CHINAOptimal design study of metal-as-insulation HTS synchronous motor with multiple operating points for electric vehicle based on many-objective optimization
Seok-Won JUNG, Sungkyunkwan University, Suwon-si, KOREA, REPUBLIC OFComparative evaluation of 3D magnetic-field analysis models for pulsed magnet design
Tomohiro TAKAYANAGI, Japan Atomic Energy Agency, Tokai-mura, JAPANInvestigation on deformation behavior of stacked REBCO tapes under compressed loads for design of high field superconducting magnets
Seungcheol RYU, Changwon National University, Changwon, KOREA, REPUBLIC OFRelaxation of stress concentration by applying Clothoid curve at the intersection of straight and curved sections in REBCO racetrack coil
Changhyung LEE, Changwon National University, Changwon, KOREA, REPUBLIC OFExperimental investigation and optimization of electromagnetic force distribution of magnet based on two field-shaper modules
Haixiang LIU, Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, CHINAStudy on Local Force and Mechanical Characteristics of Null-Flux Track Coil for Superconducting Electrodynamic Suspension Train.
Libin CUI, Southwest Jiaotong University, Chengdu, CHINAStress Analysis of the High-temperature Superconducting Electrodynamic Suspension Magnet
Guangtong MA, Southwest Jiaotong University, Chengdu, CHINAA simple method based on the reduction of cost for the stress calculation of racetrack superconducting magnets
Pengyang XIE, Southwest Jiaotong University, Chengdu, CHINASession chair: Gabriele COLOMBO
Distributed Electromagnetic Thermal Modeling Method for Closed-Loop High Temperature Superconducting Magnet
Lingfeng ZHU, University of Houston, Houston, USAAnalysis of thermal conductivity of the REBCO tape winding coil
Hankil YEOM, Korea Institute of Machinery and Materials, Daejeon, KOREA, REPUBLIC OFPossibilities of overcurrent in AC high-temperature superconducting magnets for high magnetic field
Jun OGAWA, Niigata University, Niigata, JAPANNitrogen boil-off method of measuring AC losses in twisted-stacked HTS conductor
Xinsheng YANG, southwest jiaotong university, chengdu, CHINAEvaluation of AC losses in an HTS capacitor using REBCO tapes as electrodes
Jun OGAWA, Niigata University, Niigata, JAPANElectromagnetic evaluation of YBCO multi-filament film fabricated on a substrate patterned by striped Zr
Hiroki FUJIMOTO, Kyushu University, Fukuoka, JAPANExperimental Study on a Current Sweep Method Combined with Thermal Cycle for Mitigation of Screening Current-induced Field in a Conduction-Cooled REBCO Magnet
Young Jin HWANG, Korea Maritime and Ocean University, Busan, KOREA, REPUBLIC OF18:00
Session chairs: Michael PARIZH, Hitoshi KITAGUCHI
Progress toward medical use of the Iseult whole body 11.7 T MRI
Lionel QUETTIER, CEA, Saint-Paul-lez-Durance, FRANCEThe Design and Construction of a Low-cryogen, Light-weight, Head-only 7T MRI Magnet
Anbo WU, GE Research, Niskayuna, USADesign of an asymmetric, cryogen-free REBCO no-insulation brain MRI magnet
Hubertus WEIJERS, Paihau-Robinson Research Institute, Victoria University of Wellington, Lower Hutt, NEW ZEALANDMagnetic Design of a Compact GaToroid for Very High Energy Electron and Pre-clinical Hadron Beams
Luca BOTTURA, CERN, Meyrin, SWITZERLANDStatus of Nb-Ti CCT magnet EU programs for hadron therapy
Fernando TORAL FERNÁNDEZ, CIEMAT (Centro de Investigaciones Energéticas Medioambientales y Tecnológicas), Madrid, SPAINConceptual design of an HTS Canted Cosine Tetha dipole magnet for research and hadron therapy accelerators
Ernesto DE MATTEIS, INFN, Milano, ITALYFirst winding trial for the Superconducting Ion Gantry (SIG) dipole demonstrator magnet
Marco PRIOLI, INFN, Milan, ITALYMagnetic design of the scanning magnet system for a novel hadron therapy gantry
Enrico FELCINI, CNAO, Pavia, ITALYSession chairs: Gen NISHIJIMA, Xavier CHAUD
Seven-year operation of 25-T cryogen-free superconducting magnet as a user magnet at HFLSM, IMR, Tohoku University
Kohki TAKAHASHI, Tohoku University, Sendai, JAPANVery High Field Commercial Magnets Using Bi-2212 and REBCO
Stephen MINTER, Cryomagnetics, Oak Ridge, TN, USAProgress and challenges of Bi-2212 magnet technology
Ulf TROCIEWITZ, Applied Superconductivity Center - NHMFL, Tallahassee, USAReview on progresses of the REBCO magnets with pancake coils for high field applications: design, manufacture and testing
Huajun LIU, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINA33T cryogen-free superconducting magnet development at HFLSM
Satoshi AWAJI, Tohoku University, Seandai, JAPANHigh temperature superconductor cable-wound solenoids tested in a 12 tesla background field with low-cycle fatigue and high current ramp rate results
Daniel S DAVIS, NHMFL, Tallahassee, USAThe 35T Superconducting Magnet Project at the Institute of Electrical Engineering of Chinese Academy of Sciences
Jianhua LIU, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAResistance evaluation of superconducting joint for Ni-alloy reiforced Bi-2223 tape
Yasuaki TAKEDA, National Institute for Materials Science, Tsukuba, JAPANSession chairs: Pascal TIXADOR, Naoyuki AMEMIYA
High power density induction motors and drives for aircraft propulsion, using cryofuels for thermal management
Mike TOMSIC, Hyper Tech Research, Inc., Columbus, USAEngineering design of forced-flow cooling HTS SMES with 6 kA current capacity used for NICA Accelerator
Li MING, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINADevelopment of the NI HTS Magnet Applications in SuperGenics; Quadrupole magnets for Accelerator and Racetrack coils for Ultra High-Speed Maglev
Jongho CHOI, SuperGenics Co., Ltd., Changwon, KOREA, REPUBLIC OFThe progress of the second generation high temperature superconductor tapes in Shanghai Superconductor Technology Co., Ltd.
Jiamin ZHU, Shanghai Superconductor Technology Co., Ltd., Shanghai, CHINAApplication of technical high-temperature superconducting (HTS) wire in <5T magnets
Cornelia HINTZE, THEVA Dünnschichttechnik GmbH, Ismaning, GERMANYFabrication, characterizations and conceptual design of Spiral Copper-plated Striated Coated-conductor cables (SCSC cables)
Naoyuki AMEMIYA, Kyoto University, Kyoto, JAPANLightweight and large-current stacked high-temperature superconducting tapes
Sataro YAMAGUCHI, Chubu University, Kasugai, JAPANVarious properties of face-to-face double stacked (FFDS) coated conductors
Machi TAKATO, The National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, JAPANSept. 15th, 2023
08:15
09:45
Session chairs: Mio NAKAMOTO, Neil MITCHELL
Research and Development Progress of Magnetic Confinement Fusion Superconducting Magnets in China
Jinxing ZHENG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAProspects for bolstering fusion technology development in Europe
Gianfranco FEDERICI, EUROFusion, Garching, GERMANYREBCO magnets and the path to compact fusion
Dennis WHYTE, Plasma Science & Fusion Center, Massachusetts Institute of Technology, Cambridge, USA11:30
5PoM - Poster sessions
Session chair: Matthias MENTINK
Overview of HTS accelerator magnet developments at CEA Saclay.
Maria DURANTE, CEA Paris-Saclay, Gif-sur-Yvette, FRANCECompact High Intensity Proton Accelerator Using High Temperature Superconducting Coils
Takafumi HARA, Osaka University, Osaka, JAPANProof-of-principle, energy-efficient, iron-dominated electromagnet for physics experiments
Arnaud DEVRED, CERN, Geneva, SWITZERLANDPerformance limits of accelerator dipole and quadrupole for a Muon Collider
Daniel NOVELLI, INFN and Sapienza University of Rome, Genoa, ITALYDesign and Experimental Study of Conduction Cooled MgB2 Superconducting Dipole
Enming MEI, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINAOverview of the Magnet Designs for the Interaction Region of the Electron-Ion Collider EIC
Holger WITTE, Brookhaven National Laboratory, Upton, USAHTS accelerator magnets conceptual design for future lepton colliders
Vladimir KASHIKHIN, Fermi National Accelerator Laboratory, Batavia, USAStatus of mu2e Transport Solenoid
Vito LOMBARDO, Fermi National Accelerator Laboratory, Batavia, USAORBUMP Pulsed Dipole Magnet System Design For Fermilab Booster
Vladimir KASHIKHIN, Fermi National Accelerator Laboratory, Batavia, USAStatus of Magnets for WALS Ring
Yuan CHEN, The Institute for Advanced Studies, Wuhan University, Wuhan, CHINASession chair: Alessandro BERTARELLI
Design, Prototyping Experiences, and Fabrication of AC-Dipole Magnet
Luciano ELEMENTI, Fermi National Accelerator Laboratory, Batavia, USAInstallation and future developement of permanent magnet dipoles at SOLEIL
Fabrice MARTEAU, Synchrotron SOLEIL, Saint-Aubin, FRANCEDesign Improvement of Bipolar Correction Magnet with Permanent Magnets
Yoshihisa IWASHITA, Kyoto University, Sennan-gun, JAPANPerformance Evaluation of Combined-Function Permanent Magnet for High-Intensity Beam Transportation
Yasuhiro FUWA, Japan Atomic Energy Agency, Tokai-mura, JAPANDevelopment of permanent magnet quadrupoles at NSRRC
Chin-Kang YANG, National Synchrotron Radiation Research Center, Hsinchu, TAIWANCombined function magnets for the Fermilab PIP-II Booster upgrade
Karie BADGLEY, Fermi National Accelerator Laboratory, Batavia, USASuperconducting truncated cosine theta magnets for high field septa
Kei SUGITA, GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, GERMANYPhysical design and pototype development of septum magnet for HEPS storage ring
Yuwen WU, Institute of High Energy Physics, Chinese Academy of Sciences, Dongguan, CHINASession chairs: Hélène FELICE, Tengming SHEN
Magnetic studies of the Low Beta Quadrupole Q1ApF in the interaction region (IR) for the Electron-Ion Collider (EIC)
Julien AVRONSART, Brookhaven National Laboratory, Upton, USAThe design of B1APF dipole for the EIC interaction region
Piyush JOSHI, Brookhaven National Laboratory, Upton, USAPreliminary magnetic design of the superconducting Electron Spin Rotator Solenoid magnet (SRS) for the Electron-Ion Collider (EIC)
Julien AVRONSART, Brookhaven National Laboratory, Upton, USAHTS short straight sections for FCC-ee: concepts and sub-scale demonstrators.
Jaap KOSSE, Paul Scherrer Institute, Villigen PSI, SWITZERLANDMagnetic design of the interaction region quadrupole Q2pF for EIC
Ramesh GUPTA, Brookhaven National Laboratory, Upton, USAResearch progress of superconducting quadrupole magnets in CEPC interaction region
Chuang SHEN, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, CHINASession chairs: Roland PICCIN, Alexandre LOUZGUITI
Design and test of a cold resistor in cryostat to control the quench-back effect of the DCT&CCT superconducting magnets
Yujin TONG, Institute of modern physics, Chinese Academy of Sciences, Lanzhou, CHINAQuench detection method of HTS tapes based on ultrasonic guided wave
Rui XU, Dalian Maritime University, Dalian, CHINAInterlaminar fracture toughness testing of Nb3Sn insulation systems
Steven KRAVE, Fermi National Accelerator Laboratory, Batavia, USAUpgrade of the quench detection system for the LHC Individually Powered Dipole and Quadrupole magnets
Tetiana PRIDII, CERN, Geneva, SWITZERLANDQuench analysis and experiment of CiADS iLinac superconducting solenoid
Yu LIANG, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINASimulation of thermo-mechanical stresses after a quench in the 16 T Test Facility Dipole magnet
Giorgio VALLONE, Lawrence Berkeley National Laboratory, Berkeley, USAStudy of the factors influencing adhesion between constituting parts of Nb3Sn impregnated coils
Roland PICCIN, CERN, Meyrin, SWITZERLANDStudy on properties of No-Insulation HTS solenoid based on ASTC cable
Menglin WANG, Institute of High Energy Physics, CAS, Beijing, CHINAElectrical-magnetic-thermal behavior of fast charged solder impregnated REBCO coils
Hongjun ZHANG, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINANonlinear control of No-Insulation HTS coils
Lorenzo BALCONI, INFN-Milano and University. of Milan, Segrate, ITALYTransient behavior of a REBCO metal-as-insulation racetrack coil using a partial element equivalent circuit model
Clément GENOT, CEA SACLAY, Gif-sur-Yvette, FRANCESession chairs: Fang LIU, Jinggang QIN
Experiments and analysis of the effect of a segregated copper for cryogenic stability of NbTi/Cu wires
Tomoki SHIMAMOTO, National Institute for Fusion Science, Toki, JAPANTF Coils displacement distortion FE analysis simulating non-constant assembly gap between wedging interfaces of TF Coils
Yong FENG, ITER Organization, Saint-Paul-lez-Durance, FRANCEA new closed second-generation high-temperature toroidal superconducting magnet for fusion
Hao DONG, Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Science;University of Chinese Academy of Sciences, Beijing, CHINAAnalysis of the structural behavior of the KSTAR TF magnet for the safety operation
Hee-Jae AHN, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFStudy on mechanical properties and microstructure of welded CICC jacket
Chuanyi ZHAO, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, CHINAAnalysis of strains in SPARC CS PIT-VIPER cables
Sergey KUZNETSOV, Commonwealth Fusion Systems, Cambridge, USAMechanical characterization of pultruded fiberglass reinforced composites for the precompression rings of the ITER magnet system
Ignacio AVILES, CERN, Geneve, SWITZERLANDFinite Element Analysis of the Energized ITER TF Coil in Test Conditions
José LORENZO, Fusion for Energy, Barcelona, SPAINAnalytical method of designing force-balanced tokamaks
Alexey RADOVINSKY, Commonwealth Fusion Systems, Cambridge, USAThe preload analysis of CFETR CSMC under eddy current field
Xianwei WANG, Jiangsu University of Technology, Changzhou, CHINASession chairs: Louis ZANI, Mattia ORTINO
New features of the TRAPS code for accurate 3D magnetic field calculations
Patrick HERTOUT, CEA, Saint-Paul-lez-Durance, FRANCEOn the stability analysis of HTS conductors for fusion application
Dong Keun OH, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFPulse heat mitigation control of JT-60SA helium refrigeration system
Kazuma FUKUI, National Institutes for Quantum Science and Technology, Naka, JAPANEffect of heat transfer between forced-flow cooling channels on thermal stability of REBCO conductor in fusion magnets
Sangjun OH, Korea Institute of Fusion Energy, Daejeon, KOREA, REPUBLIC OFCalculation and Factor Analysis of Thermal Temperature Field for Low-Inductance Laminated Transmission Busbar in Tokamak
Zhengyi HUANG, University of Science and Technology of China, Hefei, CHINAAC Losses Analysis on Rutherford Cable Made from HTS Quasi-isotropic Strands
Ye HE, North China Electric Power University, Beijing, CHINAMethodology for an efficient impact assessment on the ITER Magnet system exposed to new thermal loads from a repaired Thermal Shield
Germán PÉREZ-PICHEL, ITER, Saint-Paul-lez-Durance, FRANCEUpdated stability analysis of the PF/CC models with the ITER DINA 2016 plasma scenario
Alexandre LOUZGUITI, ITER, Saint-Paul-lez-Durance, FRANCEDesign and Stability analysis of 10 kA CICC multi-stage twisted by Bi-2212 round wires
Jian RONG, Lanzhou University, Lanzhou, CHINASession chairs: Yu SUETOMI, Jungbin SONG
The electromagnetic and mechanical design of a 30T high temperature superconducting magnet
Yuhang LI, Shanghai Jiao Tong University, Shanghai, CHINADesign and performance estimation of a 20-T 30-mm all REBCO conduction-cooled user magnet
Xintao ZHANG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINA20 Tesla, 40 mm cold bore all-HTS magnet
Andrey MEDNIKOV, JSC NIIEFA, Saint-Petersburg, RUSSIAN FEDERATIONMechanical Analysis, Assembly and Preloading of the High Field Nb3Sn Superconducting Magnet for the FECR Ion Source
Beimin WU, Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou, CHINADesign of REBCO BLOCK-coil insert of 15 T transverse field all-superconducting magnet
Tianfa LIAO, Huizhou University, Huizhou, CHINAOptimal design of homogeneous magnetic field for non-homogeneous DP coils
Yaohui WANG, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAMechanical stress analysis in different winding configurations for a benchtop 1-GHz microcoil NMR magnet
Junseong KIM, Massachusetts Institute of Technology, Cambridge, USAConstruction and test of 19.6 T REBCO insert magnet for the MIT 1.3 GHz NMR magnet
Dongkeun PARK, Massachusetts Institute of Technology, Cambridge, USASession chair: Pascal TIXADOR
HTS magnets for hyperscale datacentres
Ismail PATEL, University of Cambridge, Cambridge, UNITED KINGDOMInvestigation of HTS power devices cooled by LN2/CF4 mixture
Zhihao ZHOU, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAOptimized Magnetic Coupler Design for Contactless Current Charging of a HTS Magnet
Jae Young JANG, Korea University of Technology and Education, Cheonan, KOREA, REPUBLIC OFDesign of solid nitrogen cooled homogeneous MgB2 superconducting magnet for gyrotron
Bangzhu WANG, School of Electrical Engineering, Beijing Jiaotong Universisty, Beijing, CHINAEffects of moving magnetic materials in and out of superconducting magnet for active magnetic refrigeration system
Kyohei NATSUME, National Institute for Materials Science, Tsukuba, JAPANTest results of the SuperRail HTS cable system for the French railway electric grid
Loïc QUEVAL, University Paris-Saclay, Gif-sur-Yvette, FRANCECurrent transfer Length and Critical Current of Quasi-isotropic Strand at low Temperature
Heng ZHANG, North China Electric Power University, Beijing, CHINAStudy of Improved Flux-Coupling-Type SFCLs to Increase the Hosting Capacity of Renewable Power Generators in Power Grid
Lei CHEN, Wuhan University, Wuhan, CHINASession chairs: Christine HOA, Pascal TIXADOR
New configuration to improve the power input/output quality of a superconducting energy storage/convertor
Wenxin LI, Tinjin university, Tianjin, CHINAA novel time-phased distributed voltage calculation method for SMES magnets
Dengquan LIN, Huazhong University of Science and Technology, Wuhan, CHINANumberical and experimental investigations of ReBCO pancake inductance for energy storage
Dai TIANLI, Institute Plasma Physics, Chinese Academy of Science, Hefei, CHINATopology Design and Current Limiting Characteristics of DC Resistance-inductor Superconducting Current Limiter
Zheng Quan TANG, Xi’an Jiaotong University, Xi’an, CHINASimulation and experimental analysis of translational levitation characteristics in splicing superconducting plane under zero-field cooling
Zhao PENG, Beihang University, Beijing, CHINAA superconducting magnetic levitation and electrostatic feedback hybrid system for gravity measurement
Feifei NIU, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, CHINAAnalysis of the influence of magnetic field in the propulsion force of a Permanent Magnet-HTS Hybrid Magnetically Levitated Transport System
Alex Hitoshi TAKINAMI, Kansai University, Osaka, JAPANConceptual Design and Operating Characteristics of Wireless High Current Charging Units Combined with Supercapacitors for Superconducting Levitation Magnet of MAGLEV Train
Yoon Do CHUNG, Suwon Science College, Hwaseong-si, KOREA, REPUBLIC OFAn Electromagnetic-Thermal Coupled FEM Model of a Closed-Loop Coil Excitation Process for an HTS Maglev Mover Magnet
Yuwei ZHOU, Shanghai Jiao Tong University, Shanghai, CHINASession chair: Christopher REIS
Magnetization properties of HTS trapped field magnets
Difan ZHOU, Shanghai University, Shanghai, CHINATrapped Magnetic Field by Magnetization for Three HTS Bulks
Tetsuya IDA, Tokyo University of Marine Science and Technology, Tokyo, JAPANMeasurement of Dynamic Magnetic Flux Density Distribution at the Two-dimensional Surface of HTS Bulk
Nagisa KAWASUMI, Tokyo University of Marine Science and Technology, Tokyo, JAPANImprovement of electromagnetic properties for YBCO superconducting bulk
Lee SANG HEON, Sunmoon University, Chung Nam, KOREA, REPUBLIC OFElectromagnetic performance on REBCO canted stack structure for double-pancake HTS magnets
Xuan'Ang MENG, Shanghai Jiao Tong University, Shanghai, CHINAModelling and analysis of Iron-Yoke assisted Pulsed Field Magnetisation of Trapped Field Stacks at 77 K
Qi WANG, University of Cambridge, Cambridge, UNITED KINGDOM13:00
Session chairs: Naoyuki AMEMIYA, Fedor GÖMÖRY
Recent status of 2G HTS tapes at Fujikura
Masanori DAIBO, Fujikura Ltd., Sakura, Chiba, JAPANApplication of technical high-temperature superconducting (HTS) wire in high-field magnets
Anis SMARA, THEVA Dünnschichttechnik GmbH, Ismaning, GERMANYProperties of recent coated conductors relevant to their high field, low temperature magnet use
Jan JAROSZYNSKI, NHMFL, Tallahassee, USALow cost and large-scale manufacturing of high-temperature superconducting multifilamentary coated conductors
Anders WULFF, SUBRA A/S, Farum, DENMARKRutherford-type cabling for REBCO fine-filament tapes
Makoto TAKAYASU, MIT, Cambridge, MA, USAAC loss reduction in round HTS cables achieved by the filamentization of tape conductors
Fedor GÖMÖRY, Institute of Electrical Engineering, Slovak Academy of Sciences, Bratislava, SLOVAKIACritical current degradation in REBCO coated conductors subjected to thermomechanical loads
Pablo CAYADO, University of Geneva, Geneva, SWITZERLANDObservation of crack propagation caused by twisting in REBCO coated conductors by using scanning Hall-probe microscopy
Inoue MASAYOSHI, Fukuoka Institute of Technology, Fukuoka, JAPANSession chairs: Ian PONG, Michael SUMPTION
Investigating the impact of transverse compressive stress on Nb3Sn wires for high-field accelerator magnets
Carmine SENATORE, University of Geneva, GENEVA, SWITZERLANDMeasurement and computation of Nb3Sn Rutherford cables strength under multi-axial loading conditions
Giorgio VALLONE, Lawrence Berkeley National Laboratory, Berkeley, USANucleation and growth of oxide nanoparticles in internally oxidized APC Nb3Sn: mechanisms, properties, and performance for accelerator magnet applications
Michael SUMPTION, The Ohio State University, Columbus, USAMicrostructure characterization of Nb3Sn wires with oxide nanoprecipitate artificial pinning centers using synchrotron high-energy x-rays
Jean-Francois CROTEAU, Lawrence Berkeley National Laboratory, Berkeley, USATowards rod-type internal-Sn Nb3Sn wires matching the layer Jc target of FCC by internal oxidation
Francesco LONARDO, University of Geneva, Geneva, SWITZERLANDNumerical simulations and analysis of thermomagnetic instability in Nb3Sn wires
Wei LI, Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS), Beijing, CHINAPartnership Models for Stewardship of Superconducting Magnet Technology and Assurance of Supply Chains for Large Science Facilities
Lance COOLEY, FAMU-FSU College of Engineering, Tallahassee, USASession chairs: Marco BRESCHI, Thierry SCHILD
Testing a novel method for detection of quench events in superconducting magnets using MEMS acoustic sensor-array
Peter MOORE, Tufts University, Medford, USAREBCO conductor quench detection tests for MEMS acoustic sensor array diagnostics
Makoto TAKAYASU, MIT, Cambridge, MA, USAProgress of quench detection for CFETR TF prototype coil
Teng WANG, Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, CHINAInductive noise suppression in quench detection circuits of ITER central solenoid
Nicolai MARTOVETSKY, ORNL, Oak Ridge, USAQuench analysis on no-insulation-class high temperature superconductor toroidal field coil for compact high magnetic field fusion
Jung Tae LEE, Seoul National University, Seoul, KOREA, REPUBLIC OFLong-length acoustic fibers for quench detection and localization in HTS accelerator and fusion magnets
Maxim MARCHEVSKY, Lawrence Berkeley National Laboratory, Berkeley, USA
